Cart 2 india

Specification
Brand : Mavcobo
BulletPoint1 : 【School Bus Stop Arm Signal】Electric school bus "Stop" arm signal is essential to ensure children's safe passage across the road. Drivers can notice it by the flashing lights of the "Stop" signal board.
BulletPoint2 : 【Auto-locking Safety】Magnetic fixed closure ensures zero vibration when retracted, with an impact-resistant design to prevent accidental deployment even in extreme road conditions.
BulletPoint3 : 【High-intensity reflective film】High-intensity prismatic reflective film improves visibility. Enjoy 24-hour performance, vivid daytime colors, and 360° daytime/nighttime visibility up to 1,500 feet.
BulletPoint4 : 【Weatherproof Design】Adopts professional weatherproof design with IP65 waterproof rating to ensure stable performance in adverse weather conditions.
BulletPoint5 : 【Control Method】Electric/manual integration, with patented clutch mechanism, it can support more than 80,000 times of electric flip and more than 1,000 times of manual flip.
Color : Color
ExternallyAssignedProductIdentifier : 1351330233163
ItemName : Mavcobo 18″ School Bus Parking Sign LED Flashing Stop Sign Traffic Sign Stop Board for Bus IP56 Waterproof(24V)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemTypeKeyword : sidewalk-signs
Manufacturer : Mavcobo
PartNumber : Mavcobo
ProductDescription :

【Specification】

Product：School Bus Stop Signs Signal

Material：High quality aluminum sheet with ultraviolet and aging resistance,reflector sheet and two red LED

Size：45cm/18in

Quiescent Current：<20mA

Working Current：<20mA

Working Voltage：DC 12V or 24V

Turning Life：200,000

Turning Time：5 seconds or 3 seconds

LED Function：Flashing

Protection Grade：IP56

Ambient Temperature：-40℃ to 80℃

Mechanical Installation:

1. Confirm the installation position to avoid blocking lights or doors.

2. Fix the base

* Use a drill to drill holes in the pre-installed locations on the body (avoid key components).

* Bolt the base to the vehicle and apply a waterproof sealant.

3. Installation of STOP sign

Attach the reflective STOP sign to the end of the arm, making sure that the text faces outwards and is horizontal.

Maintenance:

1. Check whether the support arm screws are loose, re-tighten them.

2. clean the surface of the STOP signage to ensure that the reflective coating is clean and not broken.

3. quarterly lubrication, apply lubricant to the spindle and support arm.

Size : 24V
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 55121700