Cart 2 india

Specification
Brand : DAGIJIRD
BulletPoint1 : This product is a powerful signal generator that can output 0-10V/0-22mA signals with an accuracy of 0.01, meeting your needs for various signals.
BulletPoint2 : This signal generator uses an aluminum alloy encoder knob, which is easy and convenient to operate. The current adopts 2,3,4 wire system.
BulletPoint3 : This signal generator can switch voltage and current with one click and output at the same time, making it easy for you to observe and compare the changes of both signals.
BulletPoint4 : Turn on the battery switch, press the "MODE" button for 1 second, the digital tube will flash and display the battery voltage for 5 seconds, green is greater than 90%, yellow is greater than 40%, red is less than 40%
BulletPoint5 : This product is suitable for testing, debugging and researching various electronic devices, such as sensors, transmitters, instruments, PLC, DCS, etc. It is your ideal tool.
ItemName : DAGIJIRD 0-10V/0-22mA Current Voltage Signal Generator Accuracy 0.01 One-Key Switch Digit LCD Display
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : cell-phone-antenna-boosters
Manufacturer : DAGIJIRD
PartNumber : DJUSD461700000
ProductDescription : Features:
This product is a powerful signal generator that can output 0-10V/0-22mA signals with an accuracy of 0.01, meeting your needs for various signals.
This signal generator uses an aluminum alloy encoder knob, which is easy and convenient to operate. The current adopts 2,3,4 wire system.
This signal generator can switch voltage and current with one click and output at the same time, making it easy for you to observe and compare the changes of both signals.
Turn on the battery switch, press the "MODE" button for 1 second, the digital tube will flash and display the battery voltage for 5 seconds, green is greater than 90%, yellow is greater than 40%, red is less than 40%
This product is suitable for testing, debugging and researching various electronic devices, such as sensors, transmitters, instruments, PLC, DCS, etc. It is your ideal tool.

Package includes:
1* Signal Generator(Built-in 1000mAh/3.7V lithium battery)
1* USB Cable
1* Screwdriver
4* Alligator clips
4* Terminals

ProductSiteLaunchDate : 2024-06-06T11:57:08.915Z