Cart 2 india

Specification
Brand : Arducam
BulletPoint1 : A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040.
BulletPoint2 : Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
BulletPoint3 : Plug-and-Play - You don’t need any hardware modification to work with jetson platform. Just a driver needed. More convenient than RPI official HQ cameras.
BulletPoint4 : 4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates.
BulletPoint5 : Note：1. It can't work on the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) 2. This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
Color : IMX477 Camera Board
CompatibleDevices : Jetson Board
ConnectivityTechnology : I2C
ConnectivityTechnology1 : GPIO
ConnectivityTechnology2 : Wi
ControlMethod : remote
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 701715440401
ExternallyAssignedProductIdentifier2 : 0701715440401
HardwareInterface1 : usb
HardwareInterface2 : ethernet
HardwareInterface3 : usb2.0
IncludedComponents : 1pcs 12.3MP camera board with a dust cap for Jetsons, 1pcs 11.8"(300mm) 15pin-22pin FPC Flexible camera cable
IncludedComponents1 : Nextion HMI Display *1
IncludedComponents2 : Power Supply Test Board*1
IncludedComponents3 : XH2.54 4P Wire*1
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : Arducam IMX477 HQ Camera Board for Jetson, 12.3MP Camera Board Compatible with Nvidia Jetson Board, Raspberry Pi CM 3/3+ and CM 4
ItemPackageDimensions_Height : 5.5 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 4.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
LightColor : 彩色
Manufacturer : Arducam
Material : Plastic
MemoryStorageCapacity : 16 MB
ModelName : RB-Adu-175
ModelNumber : B0279
NumberOfItems : 5
NumberOfLightSources : 5
NumberOfPorts : 3
OperatingSystem : Linux
PartNumber : B0279
PowerSourceType : Corded Electric
ProcessorCount : 1
ProductDescription : Arducam just released this High-quality camera module for Jetson Board. You can use this camera module on Jetson Board natively with ISP features. No hardware modifications required, just install the driver and you are good to go.

SPECIFICATIONS

– Sensor: IMX477

– Optical Format: 1/2.3″ (diagonal 7.857mm)

– Resolution: 4056(H) x 3040(V) 12.3MP

– Pixel Size: 1.55um x 1.55um

– IR Sensitivity: Visible light

– Interface: 4-lane MIPI CSI-2

– Default Lens Mount: CS-Mount

– Frame Rate: (depends on the target platform, maximum fps limit might apply)
1920×1080 @ 60fps
4032×3040 @ 30fps

– Board Size: 38mm×38mm

– Hole Pitch: Compatible with 29mm, 30mm, 34mm

PACKING CONTENTS

1pcs 12.3MP IMX477 camera board with dust cap for Jetsons

1pcs 11.8"(30cm) camera cable
ProductSiteLaunchDate : 2020-11-19T06:05:17.536Z
Size : IMX477 Camera Board only
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
Theme : Indoor
TotalUsbPorts : 3
UnitCount : 5
UnspscCode : 45121500
WarrantyDescription : 6 months
WaterResistanceLevel : not_water_resistant
Wattage : 2 watts
WirelessCommStandard : bluetooth