Cart 2 india

Specification
Brand : C4Labs
BulletPoint1 : EIGHT BAYS: Hold Raspberry Pi and MOST single-board computers or 2.5" hard drives (RPi 4B & compatible). Room for most 8-port switches (maximum size of 4 1/2″ x 8 3/4″ x 1 5/8″)
BulletPoint2 : QUICK REMOVAL: Plates click securely into place for fast removal without bolts. Made with double thick acrylic for high durability (1/4")
BulletPoint3 : Multiple Cloudlet Cases can be bolted together, either vertically or horizontally for modular clusters
BulletPoint4 : For Raspberry Pi 5 4B, 3B+, 3B, 2B, and B+ (not included). Other single board computers must adhere to the RPi mounting hole pattern and port configuration.
BulletPoint5 : Designed and Crafted in Tacoma, WA, USA.
BulletPoint6 : [Importance] Please refer to this website to test whether your device can receive or transmit signals: m7spi.co .uk/mmdvmcal/. If you encounter that the device cannot connect to network after setup, please kindly contact us. We will help resolve this issue
BulletPoint7 : How to Update MMDVM_HS for WPSD 1.6.1: Kindly refer to the following website: jumbo5566.github.io.
ButtonQuantity : 104
Color : Black
CompatibleDevices : Raspberry Pi and other single board computers with the same mounting hole pattern
ConnectivityTechnology : SATA
ConnectivityTechnology1 : Wi-Fi
ConnectivityTechnology2 : Bluetooth
ConnectivityTechnology3 : USB
CoolingMethod : Air
DataTransferRate : 600 megabytes_per_second
ExternallyAssignedProductIdentifier1 : 744676486200
ExternallyAssignedProductIdentifier2 : 0744676486200
GpsrSafetyAttestation : 1
HandOrientation : Ambidextrous
HardDiskFormFactor : 2.5 inches
HardwareInterface : sata_3_0_gb
HardwarePlatform : Laptop
IncludedComponents : MMDVM Hotspot Board
IncludedComponents1 : 1x X630 V1.5 HDMI to CSI-2 Module
IncludedComponents2 : 1x X630-A1 Board
IncludedComponents3 : 1 x FPC cable（5cm length）
IncludedComponents4 : 2 x F/F M2.5*17mm Spacers
IncludedComponents5 : 4 x M2.5*5 Screws
ItemName : Cluster Case for Raspberry Pi and Other Single Board Computers-Clear/Black
ItemPackageDimensions_Height : 28.8 centimeters
ItemPackageDimensions_Length : 17.3 centimeters
ItemPackageDimensions_Width : 21.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
KeyboardDescription : Ergonomic
KeyboardLayout : qwerty
Manufacturer : C4Labs
Material : Acrylic
MemoryStorageCapacity : 16 GB
ModelName : ABX00083
ModelNumber : ZEB-BIO-BLCKLIME
NumberOfItems : 1
NumberOfKeys : 3
OperatingSystem : FreeRTOS
PartNumber : ABX00083
PowerSourceType : USB power
ProcessorCount : 1
ProductDescription : We’re proud to announce an innovative case for those building personal cloud clusters. Born of great group think, this was designed and built in Tacoma, WA. It also functions as an excellent case for holding collections of single board computers. Works With Raspberry Pi and other single board computers which adhere to the same hole pattern. There is a 1/8" gap between the inside of the case and the edge of the Raspberry Pi board.

*Plates click securely into place for fast removal without bolts.

*Hats are fully compatible with the case, but may take two slots of space.

***Official PoE Hat and Raspberry Pi will fit in one slot

*Holes for zip ties to aid with cable management.

*OD= 9.37” (238 mm) x 5.65” (144mm) x 4.825” (123mm)

*Holes in bottom of case allow for pass through of micro usb plugs, and two larger holes (in bottom of case) allow full size AC plug to pass through.

*Four 50 x 50mm fans are powered by SBCs and provide airflow for all eight ports.

Additional information:

Raspberry Pi 4 B Compatible with the following notes on fit:

if pi-4 is mounted the same as the pi-3 Ethernet cable will cross over the usb ports. If this worksfor the customer then the case can still fit 8 pi’s.

If pi-4 is mounted on the opposite side of plate it make the Ethernet closer to the bottom of the case as before. However the power and hdmi ports are facing upwards and the case is limited to 7 pi’s.

Contents:

Main case shell

2 – Cosmetic color plates

10 – port plates for SBCs or .5″ hard drives

4 – 50*50mm 5V fans

Screws for attaching fans to case

4 pairs of adhesive backed velcro pads for anchoring switch to case

Stainless steel screws/nuts for attaching to another CaaC

We take pride in providing the best cases and Customer Service

ProductSiteLaunchDate : 2018-05-18T07:00:00.000Z
RecommendedUsesForProduct : Business
Size : OLED Board
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedDevicesQuantity : 1
SwitchType : Scissor-Switch
TotalUsbPorts : 2
UnitCount : 1
UnspscCode : 43200000
WarrantyDescription : as described in the official website
WirelessCommStandard : bluetooth