Cart 2 india

Specification
Brand : DWEII
BulletPoint1 : ❃❃It is 4 Channel Isolated 5V 10A Relay Module for Arduino, AVR, PIC, ARM, DSP, etc;Each channel of the module can be set by jumper cap high or low level trigger
BulletPoint2 : ❃❃SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA
BulletPoint3 : ❃❃Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A
BulletPoint4 : ❃❃Relay Output: Normally Opened (NO) : normally open pin of relay. NO pin is not connect to COM pin when relay off.NO pin is connect to COM pin when relay on; Common pin (COM) : Common pin of the relay; Normally closed (NC) : normally close pin of relay.NC pin is connect to COM pin when relay off.NC pin is not connect to COM pin when relay on
BulletPoint5 : ❃❃High/Low Level Trigger:1. Low level trigger when jumper and L short circuit; 2. High level trigger when jumper and H short circuit
BulletPoint6 : Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
ChipsetType : ESP32-S3
Color : 5V
ConnectivityTechnology : Ethernet, USB, MIPI, HDMI
ConnectivityTechnology1 : Wi-Fi
ConnectivityTechnology2 : Bluetooth
ExternallyAssignedProductIdentifier1 : 687117761576
ExternallyAssignedProductIdentifier2 : 0687117761576
GraphicsCardInterface : integrated
IncludedComponents : 4 Channel 5V Relay Module
ItemName : DWEII 4pack 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion red Board for Raspberry Pi Arduino
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
Manufacturer : DWEII
MemoryStorageCapacity : 8 MB
ModelName : ESP32 S3 Development Board ESP32-S3-DevKitC-1-N8R8
ModelNumber : ESP32-S3-Touch-LCD-1.85C
NumberOfItems : 4
NumberOfPorts : 5
OperatingSystem : Linux
PartNumber : 5V Relay Module
ProcessorCount : 2
ProductDescription :

Specifications:

Channel:4 channel

Working Voltage:DC 5V

Normally Open Compatible Load:10A 250VAC; 15A 125VAC; 10A 30VDC

Quiescent Current:5mA

Maximum Current:190mA

Trigger Current:2 - 5mA

Trigger Voltage(Low):0 - 1.5V

Trigger Voltage(High):2.5 - 5V

Insulation resistance: 100MΩ (500VDC)

Action time: less than 10ms

Release time: less than 5ms

Power indicator: Green

Relay status indicator: Red

Module Size: 73mmX50mmX18.5mm /2.87X1.97X0.73inch(L*W*H)

Package: 2 x 4 Channel 5V Relay Module with Optocoupler Module

ProductSiteLaunchDate : 2025-01-20T01:26:58.689Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 1
UnspscCode : 32101600
WarrantyDescription : 3 months
WirelessCommStandard : bluetooth