Cart 2 india

Specification
Brand : DOCOLL
BulletPoint1 : 【Specifications】The L298N supports input voltages ranging from 5V to 35V and can deliver up to 2A of current per channel.
BulletPoint2 : 【Dual H-bridge Design】Utilizing a dual H-bridge configuration, this design enables independent control of two motors, encompassing both direction and speed regulation, thereby providing versatile operational capabilities in robotics and automation.
BulletPoint3 : 【Wide Compatibility】The stepper motor driver seamlessly integrates with popular microcontroller platforms such as Arduino UNO, Arduino MEGA, and Raspberry Pi, facilitating smooth incorporation into a wide range of projects.
BulletPoint4 : 【Easy Setup】The l298n motor driver module boasts easy-to-connect terminals and straightforward wiring, making it an ideal choice for both beginners and experienced makers.
BulletPoint5 : 【DIY Favorite】The motor driver board provides precise control for both stepper and DC motors, making it highly suitable for robotics, automation equipment, and DIY smart car projects.
BulletPoint6 : 【Note】Power adapter needs to be purchased separately
Color : 2PCS
CompatibleDevices : Arduino UNO, Arduino MEGA, Raspberry Pi
ConnectivityTechnology : USB, UART, Ethernet, Wi-Fi
ExternallyAssignedProductIdentifier1 : 0657835672423
ExternallyAssignedProductIdentifier2 : 657835672423
HardwarePlatform : Arduino
IncludedComponents : L298N
ItemName : L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 with 2pcs
ItemPackageDimensions_Height : 14.5 centimeters
ItemPackageDimensions_Length : 2.8 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemTypeKeyword : single-board-computers
Manufacturer : DOCOLL
MemoryStorageCapacity : 128 GB
ModelName : L298N
ModelNumber : J4012
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : LY354
ProductDescription : Specification:
Module name :L298N drive module
Work mode : H bridge drive (double road)
Size:45*45*25mm/1.77*1.77*0.98 inch
Main control chip : L298N dual H-bridge driver chip
Logical voltage : 5V
Drive voltage : 5v-35v
Logical current : 0mA-36mA
Driving current : 2A(MAX single bridge)
Storage temperature : - 20 ℃ to + 135 ℃
Maximum power : 25W
Product Features:
This module USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.
This module uses a large capacity filter capacitance, a continuation protection diode, can improve reliability.
Weight:30g
Notes:
-General Application: When your driver is 7V-12V, you can enable the on-board 5V logic supply.
When using the on-board 5V power supply, the + 5V power supply in the interface does not input voltage, but it can draw 5V voltage for external use.
-Unconventional application of high-voltage drive: When the driving voltage is higher than 12V, less than or equal to 24V, for example, to drive a motor with rated voltage of 18V, the jumper cap with 5V output enabled on-board voltage must be pulled out and then outside the 5V output port Connect 5V voltage to L298N internal logic voltage supply.
Package Included:
L298N Motor Driver controller Board Module *2

ProductSiteLaunchDate : 2024-12-06T04:02:08.939Z
Size : J4012 Orin NX 16GB
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 4
UnspscCode : 26111500
WarrantyDescription : 2 Year
WirelessCommStandard : 802_11_AC