Cart 2 india

Specification
BatteriesRequired : 1
Brand : PoE Texas
BulletPoint1 : We at PoE Texas have produced a more flexible PiHat accessory than the Official one from Raspberry Pi. Now you can send PASSIVE PoE from 15 volts up to 56 volts over an Ethernet cable to power your Pi project including off-grid and automotive projects.
BulletPoint2 : Fits Raspberry Pi 3 B+ and Raspberry Pi 4 (Not Included). Our design fits inside the Official Pi enclosure case and takes up less of the board. A PASSIVE PoE solution, ideal for integration with Solar and Battery systems. Not for use with a traditional PoE switch.
BulletPoint3 : Smaller and more space efficient than the Official Pi-HAT. Fits inside Official Raspberry Pi Enclosure (Not included). Comes with a heat sink. No cooling fan required. Fanless design is slim, sleek, compact, and less bulky.
BulletPoint4 : Provides a regulated 5 volts 2.4 amp with solder pads on top for a DC bus. Increases efficiency above 90% for DC to DC conversion. Extra layer of protection: optocoupled with flyback topology to prevent shorting the board.
BulletPoint5 : All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
BulletPoint6 : Package: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
BulletPoint7 : Easy to install: Attach the thermal tapes first, then install metal heatsink and fix the PoE HAT
BulletPoint8 : Provide Online Development Resources /User Manual: bit.ly/3H5wFyZ
Color : POE-PiHat
CompatibleDevices : Raspberry Pi 3 B+, Raspberry Pi 4
ConnectivityTechnology : USB
ConnectivityTechnology1 : Bluetooth
ConnectivityTechnology2 : Wi-Fi
ConnectivityTechnology3 : USB
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 696305323335
ExternallyAssignedProductIdentifier2 : 0696305323335
HardwareInterface : ethernet
Hazmat1 : LITHIUM ION BATTERIES CONTAINED IN EQUIPMENT
Hazmat10 : DE_SmallLithiumIonBatteryInEquipment
Hazmat11 : EG_SmallLithiumIonBatteryInEquipment
Hazmat12 : ES_SmallLithiumIonBatteryInEquipment
Hazmat13 : FR_SmallLithiumIonBatteryInEquipment
Hazmat14 : GB_SmallLithiumIonBatteryInEquipment
Hazmat15 : IN_SmallLithiumIonBatteryInEquipment
Hazmat16 : IT_SmallLithiumIonBatteryInEquipment
Hazmat17 : JP_SmallLithiumIonBatteryInEquipment
Hazmat18 : MX_SmallLithiumIonBatteryInEquipment
Hazmat19 : NL_SmallLithiumIonBatteryInEquipment
Hazmat2 : UN3481
Hazmat20 : PL_SmallLithiumIonBatteryInEquipment
Hazmat21 : SA_SmallLithiumIonBatteryInEquipment
Hazmat22 : SE_SmallLithiumIonBatteryInEquipment
Hazmat23 : SG_SmallLithiumIonBatteryInEquipment
Hazmat24 : TR_SmallLithiumIonBatteryInEquipment
Hazmat25 : US_SmallLithiumIonBatteryInEquipment
Hazmat26 : ZA_SmallLithiumIonBatteryInEquipment
Hazmat27 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryInEquipment
Hazmat5 : AU_SmallLithiumIonBatteryInEquipment
Hazmat6 : BE_SmallLithiumIonBatteryInEquipment
Hazmat7 : BR_SmallLithiumIonBatteryInEquipment
Hazmat8 : CA_SmallLithiumIonBatteryInEquipment
Hazmat9 : CN_SmallLithiumIonBatteryInEquipment
IncludedComponents : 1×TFT Mega Touch LCD Shield
IncludedComponents1 : PoE HAT (F) x1
IncludedComponents2 : Metal heatsink x1
IncludedComponents3 : Thermal tape (3PCS) x1
ItemName : PoE Texas Raspberry Pi PoE Hat - Power Over Ethernet PiHat Fits Raspberry Pi 3 B+ and Pi 4 - Slim, Sleek, Compact, Heat Sink, Fanless - Works with 15 to 56 Volt Passive Network Switch or Injector
ItemPackageDimensions_Height : 14.1986 centimeters
ItemPackageDimensions_Length : 3.4036 centimeters
ItemPackageDimensions_Width : 8.7884 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
Manufacturer : PoE Texas
Material : Composite
MemoryStorageCapacity : 8 MB
ModelName : Mega 2560
ModelNumber : PoE Hat
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : Walfrontwg5ivfszyx
ProcessorCount : 1
ProductDescription : Raspberry Pi HAT "Hardware Attached on Top" Accessory The POE-PiHat is ONLY for PASSIVE 12-48 volt PoE

PoE Texas has produced a more flexible PiHat accessory than the Official one from Raspberry Pi. Now you can send passive PoE from 15 volts up to 56 volts over an Ethernet cable to power your Pi project.

Product Features:

Fits Raspberry Pi 3 B+ and Raspberry Pi 4 (Not Included)

Works with a passive PoE switch or injector from 15 – 56 volts

Provides a regulated 5 volts 3 amp with solder pads on top for a DC bus

Ideal for integration with Solar and Battery systems

Optocoupled with flyback topology to prevent shorting the board

ProductSiteLaunchDate : 2019-10-23T13:19:07.367Z
Size : With Screen
Style : standard
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 2
UnspscCode : 43222612
WarrantyDescription : No Warranty
WirelessCommStandard : 802_11_BGN
WirelessCommStandard1 : 802_11_ABGN
WirelessCommStandard2 : bluetooth