Cart 2 india

Specification
Brand : SparkFun
BulletPoint1 : RP2040 General Features: Dual Cortex M0+ processors, up to 133 MHz; 264 kB of embedded SRAM in 6 banks; 6 dedicated IO for QSPI flash, supporting execute in place (XIP); 30 programmable IO for extended peripheral support
BulletPoint2 : Also Features: SWD interface; Timer with 4 alarms; Real time counter (RTC); USB 1.1 Host/Device functionality; Supported programming languages: MicroPython, C/C++
BulletPoint3 : SparkFun Pro Micro - RP2040 Features: Raspberry Pi Foundation's RP2040 microcontroller; AP2112 3.3V voltage regulator; Support programming languages: MicroPython, C/C++; On-board USB-C connector for programming: USB 1.1 Host/Device functionality
BulletPoint4 : Also Features: Built-in Resettable PTC Fuse, PTH pads w/ castellated edges; 20x multifunctional GPIO Pins [1]: 4x 12-bit ADC channels with internal temperature sensor, 0.5 MSa/s, 12-bit; 10x PWM channels; Serial Peripherals; 2x UARTs; 1x I2C (Qwiic enabled); 1x SPI
BulletPoint5 : Also Features: Buttons: Boot, Reset; LEDs: Power, WS2812 Addressable LED; 16MB External Flash Memory; Dimensions: 1.3in x 0.7in. [1] Note: The GPIO pins are muxed so you can reconfigure the pins for the digital interface of your choice! Check out the RP2040 datasheet for more information on the pins that are broken out on the board. Note: Board only.
BulletPoint6 : WIKI：wiki.sipeed.com/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html
Color : Tang nano 9k
CompatibleDevices : Computers (PCs, laptops, tablets), smartphones, USB-enabled devices
CompatibleDevices1 : Gaming Console
CompatibleDevices2 : PS5
CompatibleDevices3 : Desktop
CompatibleDevices4 : Laptop
ConnectivityTechnology : Bluetooth
ConnectivityTechnology1 : GPIO
ConnectivityTechnology2 : I2C
CoolingMethod : Air
DataTransferRate : 7100 megabytes_per_second
DigitalStorageCapacity : 2 TB
ExternallyAssignedProductIdentifier : 16971336331704
ExternallyAssignedProductIdentifier1 : 845156011728
ExternallyAssignedProductIdentifier2 : 0845156011728
FormFactor : M.2 2280
GpsrSafetyAttestation : 1
HardwareInterface : pci_x_4
IncludedComponents : 9K
InstallationType : Internal Hard Drive
ItemName : SparkFun Pro Micro - RP2040 - Dual Cortex M0+ Processors - 30 programmable IO for Extended Peripheral Support - Timer with 4 Alarms - MicroPython - C/C++ - USB-C Connector for Programming
ItemPackageDimensions_Height : 8.7884 centimeters
ItemPackageDimensions_Length : 0.7112 centimeters
ItemPackageDimensions_Width : 6.2992 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
LightColor : no light
Manufacturer : SparkFun Electronics
Material : Feather
Material1 : Metal
Material2 : Plastic
MemoryStorageCapacity : 16 MB
ModelName : SparkFun Pro Micro - RP2040
ModelNumber : AMOLED
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux
PackageLevel : unit
PartNumber : ADA2995
ProcessorCount : 2
ProductDescription : The SparkFun Pro Micro RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the good 'ol Pro Micro footprint, the board also includes a WS2812B addressable LED, boot button, reset button, Qwiic connector, USB-C, resettable PTC fuse, and castellated pads.
The RP2040 utilizes dual ARM Cortex-M0+ processors (up to 133MHz) and features:
264kB of embedded SRAM in six banks
Six dedicated IO for SPI Flash (supporting XIP)
30 multifunction GPIO
Dedicated hardware for commonly used peripherals
Programmable IO for extended peripheral support
Four channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
USB 1.1 Host/Device
The RP2040 is supported with both C/C++ and MicroPython cross-platform development environments, including easy access to runtime debugging. It has UF2 boot and floating-point routines baked into the chip. The built-in USB can act as both device and host. It has two symmetric cores and high internal bandwidth, making it useful for signal processing and video. While the chip has a large amount of internal RAM, the board includes an additional 16MB external QSPI flash chip to store program code.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
ProductSiteLaunchDate : 2021-10-31T20:30:28.561Z
ReadSpeed : 7100 bytes_per_second
ShipsGlobally : 1
Size : Welded pin version
SpecificUsesForProduct1 : Gaming
SpecificUsesForProduct2 : Business
SpecificUsesForProduct3 : Personal
Style : S880E w/ Heatsink
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 1
UnitCount : 1
UnspscCode : 43201500
WarrantyDescription : 30 Days
WirelessCommStandard : bluetooth
WriteSpeed : 5300 megabytes_per_second