Specification Brand : waveshare BulletPoint : ESP-Prog is one of Espressif’s development and debugging tools, with functions including automatic firmware downloading, serial communication, and JTAG online debugging. BulletPoint1 : No backlight, keeps displaying last content for a long time even when power down BulletPoint2 : Ultra low power consumption, basically power is only required for refreshing; Onboard voltage translator, compatible with 3.3V/5V MCUs BulletPoint3 : Standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards, Jetson Nano BulletPoint4 : Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc BulletPoint5 : Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios BulletPoint6 : Integrated with USB serial port full-speed controller, 34 × GPIO pins allows flexibly configuring pin functions BulletPoint7 : 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, 2 × ADC, etc. ChipsetType : ESP32-S3FH4R2 Color : USB 3.2 Gen1 HUB HAT CompatibleDevices : Raspberry Pi, Arduino, Nucleo CompatibleProcessorTypes : ESP32-S3FH4R2 ConnectivityTechnology : GPIO ConnectivityTechnology1 : Bluetooth ConnectivityTechnology2 : USB ConnectivityTechnology3 : Wi-Fi ControlMethod : application CustomerPackageType : Standard Packaging DataTransferRate : 5 gigabits_per_second ExternallyAssignedProductIdentifier1 : 615311268522 ExternallyAssignedProductIdentifier2 : 0615311268522 Frequency : 5 GHz FrequencyBandClass : single_band GraphicsCardInterface : integrated HardwareInterface : serial_interface HardwareInterface1 : usb HardwareInterface2 : usb_c IncludedComponents : 2.13inch e-Paper HAT, RPi screws pack, 9-pin 2.54 pitch SMD pinheader ItemName : Tri-Color 2.13inch E-Ink Display Module Three-Color Resolution 212x104 3.3v E-Paper Electronic Screen Panel with Embedded Controller SPI Interface Fits Raspberry Pi/Arduino/STM32/Jetson Nano ItemPackageDimensions_Height : 11.6 centimeters ItemPackageDimensions_Length : 3.2 centimeters ItemPackageDimensions_Width : 6.7 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : single-board-computers MainPowerConnectorType : 24-Pin Manufacturer : waveshare Material : Plastic MemoryClockSpeed : 240 MHz MemorySlotsAvailable : 2 MemoryStorageCapacity : 4 MB ModelName : Tri-Color 2.13inch E-Ink Display Module ModelNumber : 3PCS ESP32-S3-Zero NumberOfItems : 3 NumberOfPorts : 36 OperatingSystem : Linux PartNumber : 2.13inch E-Ink HAT 212x104(B) Platform : windows ProcessorCount : 1 ProductDescription : Overview
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.