Cart 2 india

Specification
BatteriesIncluded : 1
Brand : ZOOZ
Brightness : 500 lumen
BulletPoint1 : READ BEFORE YOU BUY: The GPIO module is for advanced Home Assistant and home automation users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device.
BulletPoint2 : NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked.
BulletPoint3 : WHAT YOU NEED: This 800 Series Long GPIO module adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up on a Raspberry Pi or Home Assistant Yellow hardware (sold separately). You'll need a home automation software of your choice (not included) to complete the system.
BulletPoint4 : Z-WAVE SET-UP: Follow the detailed instructions from the QR in the manual to install your module and refer to the Home Assistant / Z-Wave JS documentation to set up your Z-Wave integration according to the recommended method. Supports OTA firmware updates and and all of the latest Z-Wave library commands.
BulletPoint5 : What you will get: 5PCS 7 Bits WS2812B RGB LED Rings
BulletPoint6 : Port for a battery pack; ARM Cortex-M4 CPU
BulletPoint7 : Built-in speaker and microphone
BulletPoint8 : 20 pin edge connector along the bottom of the board
Color : Yellow
CompatibleDevices : ['Raspberry Pi', 'Home Assistant Yellow']
ConnectivityTechnology : USB
ConnectivityTechnology1 : Bluetooth
ConnectivityTechnology2 : USB
ControllerType : Ring
ControlMethod : application
DataLinkProtocol : Z-Wave Long Range
ExternallyAssignedProductIdentifier1 : 853478006933
ExternallyAssignedProductIdentifier10 : 0600346599383
ExternallyAssignedProductIdentifier2 : 0853478006933
ExternallyAssignedProductIdentifier3 : 748347529180
ExternallyAssignedProductIdentifier4 : 743724368697
ExternallyAssignedProductIdentifier5 : 0743724368697
ExternallyAssignedProductIdentifier6 : 8349396200871
ExternallyAssignedProductIdentifier7 : 0748347529180
ExternallyAssignedProductIdentifier8 : 7445803052208
ExternallyAssignedProductIdentifier9 : 0717520029441
GpsrSafetyAttestation : 1
HardwareInterface : usb2.0_a
IncludedComponents : 800 Series Z-Wave LR GPIO Module
ItemName : Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR (Use with Home Assistant Yellow or Raspberry Pi)
ItemPackageDimensions_Height : 8.2042 centimeters
ItemPackageDimensions_Length : 2.3876 centimeters
ItemPackageDimensions_Width : 7.493 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : single-board-computers
LightColor : RGB
LightType : LED
Manufacturer : Zooz
MemoryStorageCapacity : 512 KB
ModelName : micro:bit v2
ModelNumber : ZAC93
NumberOfItems : 1
OperatingSystem : Zephyr or FreeRTOS
PartNumber : ZAC93
ProcessorCount : 1
ProductDescription :

NOTE: Home Assistant Yellow or Raspberry Pi and home automation software required to build a Z-Wave gateway. Sold separately.


SPECIFICATIONS:
• Model Number: ZAC93 LR
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 3.3 VDC
• Z-Wave Range: Up to 1 mile in open space with Z-Wave Long Range enabled
• Operating Temperature: 14-104° F
• Installation and Use: Indoor only
• Dimensions: 1.1" x 1.1"


SDK: 7.18
ProductSiteLaunchDate : 2023-02-17T17:53:22.235Z
ShipsGlobally : 1
SpecificUsesForProduct : Lamp
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 1
UnitCount : 1
UnspscCode : 43201800
Voltage : 5 volts
Voltage1 : 3 volts
Voltage2 : 5 volts
WarrantyDescription : 1 year manufacturer warranty
Wattage : 2812 watts
WirelessCommStandard : bluetooth