Cyiwniao Sinker Mold 1.2.3-Ounce with 5 Cavities Fishing Weight Molds Sinker Molds for Fishing Fishing Casting

Customer rating 4.6 stars

Imported from USA | Ships in 10 working days

5% additional discount on UPI | Cash On Delivery available

1

₹12770 -35% ₹8300/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Cyiwniao
BulletPoint : #1 BRASS SINKER WIRE EYE FOR THE DO-IT MOLDS
BulletPoint1 : Usage Warnings: 1. Lead is a toxic material 2. Make sure you wear protective clothing when handling molds and must be careful when heating and pouring lead 3. Use dry molds as water can cause the molten lead to explode and cannot be handled properly When disposing of unwanted lead please take note of your local authority about appropriate methods.
BulletPoint2 : Steps for use before pouring: It is recommended to preheat the mold before use.Put scrap lead into saucepan and heat until molten . Once the lead has melted, use a cooking spoon to remove any impurities that have risen to the top. Place the hanger wire (only use wire if you are making a sinker that requires a hole in the center) and place it into the mold. Use the matching pliers to carefully grasp the sides of the mold with the pouring cavity facing you
BulletPoint3 : Pouring step:After the above steps are ready, pour the molten lead into the mold until the cavity is filled. Wait 10 seconds, use pliers to pull out the wire, then proceed to open the mold. Use pliers to cut off the excess lead on the top of the sinker, and the production is complete.
BulletPoint4 : 3 types of fishing sinkers: Fish sinkers of different weights in 1, 2, 3-Ounce can be made. The produced fishing sinkers are designed in a unique shape, which reduces the resistance of the water and reduces the possibility of entanglement with stones or rocks. The top threading Holes hold fishing line firmly in place
BulletPoint5 : Batch production: This fishing mold can easily produce a large number of fish pendants with multiple weights. The fishing weights can be easily matched with fish hooks and fishing lines. It is suitable for fishing enthusiasts to make their own fishing equipment and is ideal for outdoor fishing activities.
Color : silver
ExternallyAssignedProductIdentifier1 : 614166332198
ExternallyAssignedProductIdentifier2 : 0614166332198
FishingTechnique : euryhaline fishing
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : 2g*20, 1.5g*20, 1g*20, 0.5g*20, 0.2g*20
ItemDisplayWeight : 0.97 kilograms
ItemName : Cyiwniao Sinker Mold 1.2.3-Ounce with 5 Cavities Fishing Weight Molds Sinker Molds for Fishing Fishing Casting
ItemPackageDimensions_Height : 13.208 centimeters
ItemPackageDimensions_Length : 4.191 centimeters
ItemPackageDimensions_Width : 8.1026 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : fishing-sinkers-and-weights
Manufacturer : Cyiwniao
Material : Lead
ModelName : Fishing weights mold
ModelNumber : 8304
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 8304
Pattern : Solid
ProductDescription :
Usage Warnings: 1. Lead is a toxic material 2. Make sure you wear protective clothing when handling molds and must be careful when heating and pouring lead 3. Use dry molds as water can cause the molten lead to explode and cannot be handled properly When disposing of unwanted lead please take note of your local authority about appropriate methods.

Steps for use before pouring: Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees Fahrenheit). Once the lead has melted, use a cooking spoon to remove any impurities that have risen to the top. Place the hanger wire (only use wire if you are making a sinker that requires a hole in the center) and place it into the mold. Use the matching pliers to carefully grasp the sides of the mold with the pouring cavity facing you

Pouring step:After the above steps are ready, pour the molten lead into the mold until the cavity is filled. Wait 10 seconds, use pliers to pull out the wire, then proceed to open the mold. Use pliers to cut off the excess lead on the top of the sinker, and the production is complete.

Package includes:
1 x Sinker Weight Mold
ProductSiteLaunchDate : 2024-07-19T10:03:32.951Z
RecommendedUsesForProduct : Bottom fishing, Lake fishing, Ocean fishing, River fishing
Size : 1
Style : 1/8oz-40pcs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 49131500
WarrantyDescription : 。

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
8
4*
1
3*
2
2*
0
1*
0

Read all 11 customer reviews

Satisfactory but not impressive.

Happy with the quality and performance.

CouldnÕt be happier with this purchase.

This works like a charm.

Five stars all the way.

Absolutely fantastic product!

CouldnÕt be happier with this purchase.

Stunning design and excellent performance.

Best in its category!

Impressive quality and durability.

Expected a bit more for the price.

Have an opinion on this page? Let's hear it.