Cart 2 india

Specification
Brand : Shorpioen
BulletPoint1 : A device for giving stability to one part of a structure by making it fast to another consisting of (A) a threaded stud with a conical end flared outward; (B) a hollow, cylindrical dilating sleeve assembled over the stud and positioned against the minor diameter of the cone; (C) a washer and low-crown cap nut assembled at the end opposite the cone.
BulletPoint2 : The anchor works by expanding against the material in which it is embedded. When the flat head is turned clockwise the conical end is pulled into the dilating sleeve pushing it outward 360° around the anchor into the masonry. They are designed to be used
BulletPoint3 : Another is that the length of the sleeve induces less stress on the substrate than does a wedge anchor. The acorn nut variety is preferred when a decorative finished look is desired (ie. attaching theater seating to the floor).
BulletPoint4 : Acorn Nut: AISI 1010 - 1018 steel -- Washer: Hot-rolled, hot-rolled & pickled, or cold-rolled steel -- Threaded Bolt: AISI 1010 - 1018 steel -- Sleeve: AISI 1010 - 1020 steel
BulletPoint5 : Acorn Nut: Type 304 stainless steel -- Washer: 18-8 stainless steel -- Threaded Bolt: 18-8 stainless steel -- Sleeve: Type 304 stainless steel
Color : Multicoloured
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Zinc
ExternallyAssignedProductIdentifier : 4042146829080
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemName : 1/4X5/8 Acorn Head Sleeve Anchor Zinc (Pack Qty 100) BC-1410ASLC by Shorpioen
ItemPackageDimensions_Height : 20 centimeters
ItemPackageDimensions_Length : 40 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 100
ItemTypeKeyword : sleeve-anchors
Manufacturer : Shorpioen LLC
Material : Zinc
MeasurementSystem : Inch
ModelName : KS Tools Anchor Block
ModelNumber : BC-1410ASLC
NumberOfItems : 100
PartNumber : BC-1410ASLC
PowerSourceType : Hand-operated
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. A device for giving stability to one part of a structure by making it fast to another consisting of (A) a threaded stud with a conical end flared outward; (B) a hollow, cylindrical dilating sleeve assembled over the stud and positioned against the minor diameter of the cone; (C) a washer and low-crown cap nut assembled at the end opposite the cone.. The anchor works by expanding against the material in which it is embedded. When the flat head is turned clockwise the conical end is pulled into the dilating sleeve pushing it outward 360° around the anchor into the masonry. They are designed to be used in solid or hollow masonry, including cinder block, brick, marble and concrete. One advantage of the sleeve anchor is that it can be removed after it's been installed.. Another is that the length of the sleeve induces less stress on the substrate than does a wedge anchor. The acorn nut variety is preferred when a decorative finished look is desired (ie. attaching theater seating to the floor).. Acorn Nut: AISI 1010 - 1018 steel -- Washer: Hot-rolled, hot-rolled & pickled, or cold-rolled steel -- Threaded Bolt: AISI 1010 - 1018 steel -- Sleeve: AISI 1010 - 1020 steel. Acorn Nut: Type 304 stainless steel -- Washer: 18-8 stainless steel -- Threaded Bolt: 18-8 stainless steel -- Sleeve: Type 304 stainless steel.
ProductSiteLaunchDate : 2016-11-17T16:08:06.248Z
Size : 1/4X5/8
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31160000