Cart 2 india

Specification
Brand : Everflow
BulletPoint1 : Quick connect Sleeve provides one-Tool Installation
BulletPoint2 : Eliminates fatigue in repetitive Installations
BulletPoint3 : Applicable for vertical and horizontal Applications
BulletPoint4 : Body provides extreme Durability and life; Made in Usa
BulletPoint5 : for Fast, Onedrill Installation of concrete sammys
Color : Silver
CustomerPackageType : Standard Packaging
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 092097920873
ExternallyAssignedProductIdentifier2 : 0092097920873
ExternallyAssignedProductIdentifier3 : 00092097920873
GpsrSafetyAttestation : 1
GradeRating : Grade 304
IncludedComponents : Actual Item
ItemName : Everflow SL 250 Sleeve (h) Sammys 8098910 Designed for Concrete/Wood, Fast and Safe Unique Style with Easy Adjustment, One Drill Installation Tool, Extreme Durable Construction
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemShape : Block
ItemTypeKeyword : sleeve-anchors
Manufacturer : Sammys
Material : Stainless Steel 304
Material1 : Stainless Steel
Material2 : Carbon
Material3 : Zinc
MaximumShearStrength : 4218
ModelName : SL 250 Sleeve (h)
ModelNumber : 8098910
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 10
PartNumber : 8098910
Pattern : Drill Installation Tool
ProductDescription : Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Wet environment.

Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 5/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 5/8".

Length Anchor
The length of the anchor is 3"
Minimum Embedment
The minimum anchor embedment into the concrete is 2". Therefore, the anchor must be installed so that a minimum of 2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1". This will ensure that the minimum embedment of 2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 5/8" diameter anchor requires the hole in the fixture to be 3/4".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 6-1/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-1/8" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2017-05-15T18:43:14.567Z
Size : 250 Sleeve
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 27111700