Cart 2 india

Specification
Brand : RLECS
BulletPoint1 : Can be installed in a wide variety of masonry, solid concrete, brick or block.
BulletPoint2 : The anchor requires a 8mm hole to be drilled in the base material(Concrete, Block, and Brick).The hole should be drilled with carbide tipped bit and used in a hammer drill.
BulletPoint3 : The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The M6 diameter anchor requires the hole in the fixture to be 8mm.
BulletPoint4 : Made of high quality 304 stainless steel,corrosion resistance,durable to use.
BulletPoint5 : Size: M6x70mm, total length: 70mm, sleeve length: 50mm, screw diameter: 6mm, sleeve diameter: 8mm.
Color : Silver
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 046737824809
ExternallyAssignedProductIdentifier2 : 0046737824809
GradeRating : Grade 5
ItemName : Hex Sleeve Anchor RLECS 10PCS 304 Stainless Steel Sleeve Anchors Bolts,Sleeve Anchors Nuts and Washers Expansion Bolts, M6x70mm
ItemPackageDimensions_Height : 1.6 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 10
ItemShape : Hexagonal
ItemTypeKeyword : sleeve-anchors
Manufacturer : RLECS
ManufacturerGrade : Grade 304
Material : Stainless Steel
MetalType : Stainless Steel
NumberOfItems : 10
NumberOfPieces : 10
PartNumber : 6220-SSEB-M6X70-10
ProductDescription : Product Description

Specification
Material: 304 stainless steel
Surface treatment: Zinc Plated
Size: M6x70mm, total length: 70mm, sleeve length: 50mm, screw diameter: 6mm, sleeve diameter: 8mm
Can use the drill model: 8.0mm

Feature
Made of high quality 304 stainless steel,corrosion resistance,durable to use.
Can be installed in a wide variety of masonry, solid concrete, brick or block.
The anchor requires a 8mm hole to be drilled in the base material(Concrete, Block, and Brick).The hole should be drilled with carbide tipped bit and used in a hammer drill.
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The M6 diameter anchor requires the hole in the fixture to be 8mm.

Installation method:
1. Select an alloy drill bit that matches the outer diameter of the internal expansion bolt, and then drill the hole with reference to the length of the internal expansion bolt. Drill the hole to the depth you need for installation.
2. Install the flat washer, spring washer and nut, turn the nut to the bolt and the end to protect the thread, and then insert the inner expansion bolt into the hole.
3. Turn the wrench until the washer and the surface of the fixture are flush. If there is no special requirement, generally tighten it by hand and then use the wrench for three to five turns.

Package included:
10PCS Sleeve Anchors
ProductSiteLaunchDate : 2023-11-21T02:47:50.346Z
Size : One Size
Style : Sleeve Anchor
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 75
UnspscCode : 31161500