Cart 2 india

Specification
Brand : Simpson Strong-Tie
BulletPoint : pre-assembled, expanding sleeve anchors
BulletPoint1 : Please see the specifications in the table below for full details. If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.
BulletPoint2 : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
BulletPoint3 : ASMC Industrial Brand fasteners are guaranteed to be of the highest quality and are lot controlled, providing traceability to the manufacturer and raw material.
Color : Zinc Plated
ExteriorFinish : Plain Finish (No Plating)
ExternallyAssignedProductIdentifier : 20044315286302
ExternallyAssignedProductIdentifier1 : 0765471536310
ExternallyAssignedProductIdentifier2 : 765471536310
GradeRating : Grade 304
ItemName : Simpson Strong-Tie SL62300H Sleeve-All Hex Head 5/8-Inch x 3-Inch 80 Pk (80)
ItemPackageQuantity : 50
ItemTypeKeyword : sleeve-anchors
Manufacturer : SIMPSON STRONG-TIE
ManufacturerGrade : Grade 304
Material : Stainless Steel 304
MetalType : Stainless Steel
ModelName : Sleeve Anchors
ModelNumber : SL62300H
NumberOfItems : 80
NumberOfPieces : 50
PartNumber : SL62300H
ProductDescription :

Sleeve-All expanding anchors are pre-assembled, expanding sleeve anchors for use in all types of solid base materials. This anchor is available in acorn, hex, rod coupler or flat head style for a wide range of applications.

Material

• Carbon steel or stainless steel

Finish

• Carbon steel anchors are zinc plated

Installation

Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.

Drill the hole to the specified embedment depth, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling.

Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.

Tighten to required installation torque.

ProductSiteLaunchDate : 2022-06-14T05:04:04.866Z
Size : 80
Style : Sleeve Anchor Hex Nut, 1 7/8" Long
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31160000