Cart 2 india

Specification
Brand : NJBVRS
BulletPoint1 : Spliced Rails: Rail is made by solid 1.21" (5.5 mm) thick, 1.51" (40mm) wide carbon steel, finished with highly powder coating.
BulletPoint2 : Rail Spacers & Lag Bolts With lag bolts and the spacers it is used to connect the rail on the wall
BulletPoint3 : Hangers:The strap of the hanger is made by 121" thick carbon steel and the wheel is made by duty nylon, very and smooth. Fit door panel thickness: 1.18"-1.96" (30mm -50mm).
BulletPoint4 : Door Stoppers: Door stoppers slide along the rail and tighten down at any point to stop your doors anywhere you want, and they're cushioned by rubber caps for a quiet close.
BulletPoint5 : Floor Guide: Mark center line of overlap and place center of floor guide in line. Slide the door closed and secure the floor guide.
Color : 1
ExternallyAssignedProductIdentifier : 7803018231786
ItemName : Sliding Barn Door Hardware Kit Sliding Barn Door Hardware Kit, Heavy Duty Smoothly and Silently Easy to Install Fit Single Door Panel Single Big Wheel-Shaped(5FT)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : commercial-sliding-doors
Manufacturer : NJBVRS
ModelName : 1005004495225222
ModelNumber : 1005004495225222
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 1005004495225222
ProductDescription : Sliding Barn Door Hardware Kits
(Basic "J")(J Shape Hangers)
This sliding wood door hardware kit set is a great design for home, which is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly way. The door is hung on a piece of hardware with a wheel.That rolls along a track mounted to the wall.
STEP 1.
Make the stud locations.
Make sure that the track is level and allow for the installation height of the floor guide.
If the floor is not level, refer to the highest point to avoid affecting the movement of the sliding door.
STEP 2.
Attach head board on the wall (if needed).
STEP 3.
Install the metal track on the wall.
Spliced track, assembly needs to be completed in advance.
STEP 4.
Mount the stoppers on the track.
STEP 5.
Install the rollers on the door.
STEP 6.
Mount the anti-jump disks.
STEP 7.
Mount the door guides.
STEP 8.
Lift and place the door on the track.
Packaging List
trackSpliced
4 * Door Stopper
4 * Anti-jump Pad
4 * Steel Hanger (for Double door) [ 2 Rollers No Rail : just 1 pair rollers for single door ]2 * Door Guide (T type)
1 * Hex Wrench
All other necessary hardware is included as you see in the pictures
ProductSiteLaunchDate : 2025-02-24T08:59:11.609Z
Size : 5 Feet
UnitCount : 1
UnspscCode : 31160000