Cart 2 india

Specification
Brand : KYHHL
BulletPoint1 : We have a warehouse in the local area that can deliver accessories to you faster (this product is not made in China). Thank you for choosing us
BulletPoint10 : It is HIGHLY recommended that you install one kit on each blade however, because only modifying some but not all of the blades will cause a harmonic imbalance in the spinning impeller which could easily cause excessive wear on the impeller shaft bearing resulting in very costly repairs!
BulletPoint2 : Description: Product includs: 1-Rubber Paddle 1-Metal Straps 3-Bolts & Lock Nuts 1-Self-tapping Screws Detailed in the product pictures
BulletPoint3 : 3/8" thick rubber paddle (2"W x 5"L) - (trim to fit as needed) Made from Styrene Butadiene rubber (SBR rubber) [SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75]
BulletPoint4 : Metal Strap with holes - 1 3/8" W x 3 3/4"L ,1/16" thick
BulletPoint5 : Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; Hex Bolts,Hex lock nuts nylon inser
BulletPoint6 : Self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling
BulletPoint7 : This kit is to reduce the existing“gap”between the snow blower's impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine's operational efficiency and snow throwing capability will be, and the less likely that your machine will clog up with snow.
BulletPoint8 : This "gap" allows snow and slush to slip by the blades and build up around the impeller and in the discharge chute clogging it. This gap also decreases the efficiency of the impeller's ability to propel the snow up the chute resulting in less throwing distance.
BulletPoint9 : This problem is well known to people with two-stage snow blowers, and the easy and the quick, inexpensive fix is to modify the impeller blades by adding a strip of reinforced rubber to each one of them to eliminate this gap.
ExternallyAssignedProductIdentifier1 : 0765037770776
ExternallyAssignedProductIdentifier2 : 765037770776
IsAssemblyRequired : 1
ItemName : 1 Pack Universal 3/8" Blade Impeller Kit for 2 Stage Machine Snowblower
ItemTypeKeyword : snow-blower-accessories
Manufacturer : KYHHL
ModelName : 3/8" Blade Impeller Kit
ModelNumber : 3/8" Blade Impeller Kit
NumberOfItems : 1
PartNumber : 765037770776
ProductDescription : 3/8" Blade Impeller Kit
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 22100000