Cart 2 india

Specification
Brand : snobar
BulletPoint1 : Stop Snow Slides on Screw-Down Metal Roofs: Install snow bars or snow guards on your steep metal roof. These devices are designed to mitigate the dangers of sliding snow and ice on a mechanically fastened sloped metal roof by holding the snow in place and preventing it from sliding off in large, dangerous pieces. Screw-mounted snow bars with a flat face are a good choice for exposed fastener metal roofs.
BulletPoint2 : Lifetime Guarantee: Field tested for over 30 years! The structural aluminum components of this system will never rust. When used properly by spreading the load across the entire roof, not just isolated areas such as over doorways, this product will last the life of the roof. See the spacing guidelines picture.
BulletPoint3 : Quick Installation: Patented snow rail brackets feature a quick installing, top load, drop in bar mounting system. Simply screw the brackets through the roof into a structural support below, drop the bar in the brackets, and secure with 2 sell drilling Tek screws in each bracket. Optionally a 2-inch piece of the existing roof panel (not included) can slide in the face of the snow bar and mounting bracket to match the roof.
BulletPoint4 : Continuous Snow Bar System: The structural aluminum bar can be spiced together to make a continuous snow barrier across the roof for optimum holding power. The aluminum ColorBar is one of the few snow retention systems available that provides this important feature.
BulletPoint5 : Contents: 1 structural 6-foot aluminum ColorBar snow rail with color slot, 6 extruded aluminum screw down mounting brackets with color slots, thirty-six 2-inch #14 galvanized metal roof wood purlin screws with neoprene sealing washers, and 12 Galvanized Tek Screws. If purchasing more than 1 ColorBar, you will receive 1 splice plate and 1 Tek screw to attach each bar together.
Color : Mill Aluminum Finish
ExternallyAssignedProductIdentifier1 : 0300381820984
ExternallyAssignedProductIdentifier2 : 300381820984
IncludedComponents1 : 1 structural 6-foot aluminum ColorBar snow rail
IncludedComponents2 : 6 extruded aluminum screw down mounting brackets
IncludedComponents3 : thirty-six 2-inch #14 galvanized metal roof wood purlin screws with neoprene sealing washers
IncludedComponents4 : 12 Galvanized Tek Screws
IncludedComponents5 : If purchasing more than 1 ColorBar, you will receive 1 splice plate and 1 Tek screw to attach each bar together.
ItemName : ColorBar Metal Roof Snow and Ice Guards, Heavy Duty Aluminum Screw Down Snow Rails 6ft kit
ItemPackageDimensions_Height : 6.5 inches
ItemPackageDimensions_Length : 76 inches
ItemPackageDimensions_Width : 6.5 inches
ItemTypeKeyword : snow-shovels
ItemTypeName : Metal Roof Snow Retention
Manufacturer : SnoBlox-SnoJax
Material : Aluminum
ModelName : ColorBar Snow Rails
ModelNumber : CBColBr-Mill-6FT
NumberOfItems : 1
ProductDescription : The purpose of snow bars also known as metal roof snow guards or snow rails, are used to prevent snow and ice from sliding off sloped metal roofs in snowy regions, thus protecting people and property from potential harm. The ColorBar screw-mounted, continuous snow rails, are a type of structural aluminum snow bar designed for use on screw-attached metal roofs using screw-down aluminum brackets. This product is typically suitable for PBR, R-panels, and corrugated metal roofs that are mechanically fastened. Incompatibility with Standing Seam Roofs: It's crucial to note that screw-mounted snow rail systems should never be installed on standing seam metal roofs. Standing seam roofs usually prohibit roof penetration through the metal, so different attachment methods like clamps or adhesives are used for concealed fastener-type roofs. Screw-mounted snow bars are attached to the roof using wood substrate screws. These screws go through the roof's surface and into a structural support below, providing a strong and secure connection. This setup minimizes the risk of the snow bars becoming dislodged during heavy snow and ice conditions. Proper Installation and Spacing: Correct installation is essential to prevent damage to the roof and avoid potential leak points. The spacing and placement of snow bars must be done correctly to ensure their effectiveness in preventing snow and ice buildup. Please see the spacing guidelines picture in the listing. The specific design and installation requirements for screw-mounted snow bars can vary based on the type of roof, local climate, and other factors. It is highly recommended to consult with a professional roofer or the snow bar manufacturer to determine the appropriate snow retention system and installation method tailored to your specific needs. Proper installation of snow bars is essential for the safety and integrity of your roof in snowy conditions. Always seek expert guidance when installing snow railing systems to ensure they are installed correctly and effectively.
ProductSiteLaunchDate : 2023-10-17T16:31:30.887Z
SupplierDeclaredDgHzRegulation : not_applicable