Cart 2 india

Specification
Brand : Indium
BulletPoint : .- Type: Easy, Medium and Hard. .- Melting point Easy: 1145°F (618°C). .- Melting point Medium: 1275° F - 690.5°C .- Melting point Hard: 1365° F - 787.7°C .- Length: Approx. 5 feet long (Approximately 1/4TOz) each coil .- Wire Diameter: 0.032" .- Weight: 1/4 Ozt each coil .- CADMIUM-FREE .- Made in USA
BulletPoint1 : 230-RC core, SN995 alloy
BulletPoint2 : 0.032 Diameter, 1LB spool
BulletPoint3 : Meets the requirement of J-STD-004B Type REL1
BulletPoint4 : Low-spatter formation gives you cleaner boards and increased operator safety with less than 1% spattering
BulletPoint5 : Light-colored residue
Color : Silver
ExternallyAssignedProductIdentifier1 : 0094308402253
ExternallyAssignedProductIdentifier2 : 094308402253
FinishType : Finish
FitType : Fitted
IncludedComponents : no
ItemName : Indium 54662-0454 - Robotic Wire Solder; 230-RC Core, SN995 Alloy (0.032 Diameter, 1LB Spool)
ItemPackageDimensions_Height : 0.02 inches
ItemPackageDimensions_Length : 0.03 inches
ItemPackageDimensions_Width : 0.02 inches
ItemPackageQuantity : 1
ItemTypeKeyword : solder
Manufacturer : INDIUM CORPORATION OF AMERICA
Material : brass
ModelName : 54662-0454
ModelNumber : 54662-0454
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 54662-0454
PowerSourceType : AC
ProductDescription : Indium 54662-0454 230-RC core, SN995 alloy 0.032 Diameter, 1LB spoolMeets the requirement of J-STD-004B Type REL1The low-spatter formation gives you cleaner boards and increased operator safety with less than 1% spatteringLight-coloured residue Robotic Wire Solder; 230-RC Core, SN995 Alloy (0.032 Diameter, 1LB Spool) Indium Corporation’s CORE 230-RC is a formula developed to meet the demanding requirements of robotic and laser soldering. It incorporates a highly effective activator package with new “no-spatter” technology in high-reliability flux media. CORE 230-RC is fully REACH-compliant, containing no REACH substance of very high concern (SVHCs). CORE 230-RC is not used solely for robotic and laser soldering since it also performs exceptionally well in hand soldering applications. The no-spatter feature eliminates flux spatters that can burn operators’ hands.Process Recommendations: Match the tip size to the part to be solderedApply the solder wire to the joint, not to the soldering iron tipUse the lowest temperature possible610–700°F (320–370°C) for SnPb and Pb-freeSurface mount (SMT) soldering should be completed in 1–2 secondsPlated through-hole (PTH) soldering should be completed in 1–3 secondsThe robotic soldering process set-up is highly customizable and depends on the assembly being solderedA smooth solder joint appearance requires the correct amount of temperature and time; fine-tuning the process parameters may be required to achieve the best possible outcomeDuring robotic soldering, flux build-up and charring may occur; to avoid build-up, increase the iron tip cleaning frequency or reduce the iron tip temperature Cored Wire for Robotic and Laser Soldering Indium Corporation specializes in making fine-diameter wire, typically between 0.008' (0.2mm) and 0.015' (0.381mm) diameter for robotic and laser soldering
ProductSiteLaunchDate : 2022-07-21T05:14:45.725Z
SpecificUsesForProduct : Professional
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800
WarrantyDescription : 6 mounths