Cart 2 india

Specification
Brand : Kester
BulletPoint : ULTRA THIN
BulletPoint1 : (1) Kester 24-6337-8800 Spool
BulletPoint2 : 1 Pound per Spool
BulletPoint3 : Alloy: Sn63Pb37
BulletPoint4 : 63% Tin
BulletPoint5 : 37% Lead
BulletPoint6 : 1-Pound
Color : Assorted
ExternallyAssignedProductIdentifier1 : 729198854430
ExternallyAssignedProductIdentifier2 : 0729198854430
ExternallyAssignedProductIdentifier3 : 00031427124062
ExternallyAssignedProductIdentifier4 : 0700736594148
ExternallyAssignedProductIdentifier5 : 0729198352561
ExternallyAssignedProductIdentifier6 : 0027041246617
ExternallyAssignedProductIdentifier7 : 00027041246617
GpsrSafetyAttestation : 1
IncludedComponents : Alpha Fry AM12406 Cookson Elect 40/60 Acid Core Solder
ItemDisplayDimensions_Diameter : 0.3 millimeters
ItemDisplayWeight : 1 pounds
ItemName : Kester Solder - 245 No-Clean Flux Solder,.031",1lb. Spool
ItemPackageDimensions_Height : 7.1882 centimeters
ItemPackageDimensions_Length : 5.6896 centimeters
ItemPackageDimensions_Width : 6.096 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solder
Manufacturer : Kester Solder
Material : Metal
ModelName : Alpha Fry AM12406 Cookson Elect 40/60 Acid Core Solder
ModelNumber : 24-6337-8800
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 24-6337-8800
Pattern : 44 Flux-Cored Wire
PowerSourceType : fuel_powered
ProductDescription : Kester 24-6337-8800 Alloy type: Sn63Pb37Diameter: 0.031'Flux %: 1.1%Weight: 1lbHighy reliable post-soldering residue Flux-Cored Solder Wire, No-Clean, Leaded, Sn63Pb37, 1.1%, 0.031', 1lb Kester 245 was developed to complement low residue liquid fluxes being used by the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 245 results in visually acceptable assemblies without cleaning, yet soldering quality and efficiency are comparable to that obtained with mildly activated rosin flux. 245 is classified as ROL0 per J-STD-004. 245 is Bellcore GR-78 compliant. Cleaning The 245 flux residues are non-corrosive, non-conductive and do not require removal in most applications. IPA will not clean the residues off the surface of the circuit board after the soldering process. A saponifier or cleaning agent specifically designed to clean a no-clean flux is required to clean the residues.Kester 245 Flux-Core Solder Wire Comparison Table Click here. (1) Kester 24-6337-8800 Spool | 1 Pound per Spool | Sn63Pb37 1.1%/245 .031 1 LB SPL Kester 245 was developed to complement low residue liquid fluxes being used by the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. The use of 245 results in visually acceptable assemblies without cleaning, yet soldering quality and efficiency is comparable to that obtained with mildly activated rosin flux. 245 is classified as ROL0 per J-STD-004. 245 is Bellcore GR-78 compliant.
ProductSiteLaunchDate : 2013-06-13T03:11:15.441Z
SafetyDataSheetUrl : http://www.chipquik.com/msds/SMDSW.015%20100g.pdf
Size : No Size
StreetDate : 2017-12-15T00:00:01Z
Style : 44 Flux-Cored Wire
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800