Cart 2 india

Specification
Brand : ZEZEFUFU
BulletPoint : Silver Bearing Alloy Lead-Free
BulletPoint1 : 1. Solder tin paste is a new type of solder material that comes with SMT.
BulletPoint2 : 2. Solder paste is a complex system that is made of a paste of solder powder, flux, and other additives.
BulletPoint3 : 3. At the normal temperature, the solder tin paste has a certain viscosity, and the electronic component can initially adhere to a predetermined position.
BulletPoint4 : 4. At the soldering temperature, the soldered component and the printed circuit pad are soldered together(Permanent connection.) with the evaporation of the solvent and some additives.
BulletPoint5 : Welding tool--, to ,nickel strip kit
Color : XG-50(35 Grams)
IncludedComponents : Nickel Strip
ItemDisplayDimensions_Height : 0.01 inches
ItemDisplayDimensions_Length : 3.94 inches
ItemDisplayDimensions_Width : 0.08 inches
ItemDisplayWeight : 0.72 pounds
ItemName : Solder Paste Tin Flux Soldering Cream Rework Tool
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 3
ItemTypeKeyword : solder
Manufacturer : ZEZEFUFU
Material : Nickel
ModelName : Silver Bearing
ModelNumber : W25051NMP135XRM
NumberOfItems : 1
PartNumber : JUSA242300003
ProductDescription : What is the solder tin paste?
1. Solder tin paste is a new type of solder material that comes with SMT.
2. Solder paste is a complex system that is made of a paste of solder powder, flux, and other additives.
3. At the normal temperature, the solder tin paste has a certain viscosity, and the electronic component can initially adhere to a predetermined position.
4. At the soldering temperature, the soldered component and the printed circuit pad are soldered together(Permanent connection.) with the evaporation of the solvent and some additives.

Instructions:
1. Before the opening, the temperature of the solder paste should be raised to the ambient temperature (25degC), and the temperature return time should be about 3-4 hours. It is forbidden to use other heaters to raise the temperature instantaneously.
2. After the solder paste is opened, it is recommended to use it within 24 hours at room temperature.
3. Placed in the air for a long time, the solder paste will become a tin block due to moisture absorption.
4. The indoor temperature should be controlled at 22-28 degC, and the humidity RH30-60% is the best working environment.
5. To wipe the wrong substrate, it is recommended to use industrial alcohol or industrial cleaner.
ProductSiteLaunchDate : 2025-03-26T10:47:17.752Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800
WarrantyDescription : 1