Cart 2 india

Specification
Brand : WnewTools
BulletPoint : 10g Solder paste soldering flux soldering paste soldering oil
BulletPoint1 : Model WNB W-001 solder mask oli(Green)
BulletPoint2 : Material Solder mask material
BulletPoint3 : Dielectric strength >500V/mil
BulletPoint4 : Solvent resistance Trichloroethane boiled for 2 minutes without falling off
BulletPoint5 : Solder resistance 255-265u2103 10s * 3 times
CareInstructions : Machine Wash
Color : Green Bottle
ExternallyAssignedProductIdentifier1 : 0769902933693
ExternallyAssignedProductIdentifier2 : 769902933693
IncludedComponents : Product Manual
ItemName : 100g Green Oil UV Solder Mask Ink PCB Paint Prevent Corrosive Arcing Soldering Paste Flux Ink
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 22 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solder-flux
Manufacturer : Wnew
Material : Copper
ModelName : 100g Green Oil UV Solder Mask Ink PCB Paint Prevent Corrosive Arcing Soldering Paste Flux Ink
ModelNumber : PANN1622073
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PANN1622073
PowerSourceType : hand_powered
ProductDescription :

Feature:

Model WNB W-001 solder mask oli(Green)

Material Solder mask material

Dielectric strength >500V/mil

Solvent resistance Trichloroethane boiled for 2 minutes without falling off

Solder resistance 255-265℃ 10s * 3 times

Hardness >5H

Curing condition UV light

Capacity 10cc/100g

Application PCB board repair essential materials

Net weight As your choice

Package Included:

1 x WNB 100g Green Oil UV Solder Mask Ink

ProductDescription1 : Rosin flux-gel conforming to DIN EN 29454 type 1.1.3.C (DIN 8511 F-SW 32).
ProductDescription2 : Matedexl Kolopaste No. 8 is a ready to use, concentrated rosin flux. It is suitable for repair work on surface mounted devices and soldering operations with soldering irons.
ProductDescription3 : Other available methods of heating to cause re-flow, such as hot air and IR, may be used.
ProductDescription4 : The solder cream is also suitable for soldering large areas of copper,brass and pre-tinned parts and can be applied with a dispenser.
ProductDescription5 : The very low activation causes an excellentinsulation reaction of the flux residues after the soldering process.
ProductSiteLaunchDate : 2023-11-21T16:09:08.821Z
Size : Green bottle soldering paste 100g
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1