Cart 2 india

Specification
Brand : STIRRI
BulletPoint1 : Resin-based, low-activity, no-clean tacky paste flux for soldering electronics - Flip Chip and BGA assembly. Suitable for hand-soldering, repairs and rework. Easily removable using warm DI-water, Acetone or Isopropanol. Conatians QCAid optical tracer for quick visual inspections
BulletPoint2 : VERSATILE APPLICATION: Can be cleaned using warm 60ºC deionized water under pressure 55 PSI (squirting ftom 10cc syringe). The best cleaning results are achieved on preheated PCBs, as it cleans most effectively while the PCB is still hot.
BulletPoint3 : Excellent flow from the syringe - 20-50 x10'3 mPa/s. Halide-free (<0.05%). Surface insulation resistant. No copper mirror breakthrough. Low electrochemical migration (<1 decade drop).
BulletPoint4 : ROL0 classification - non-corrosive, doesn't short components, can be left on board for multiple SMT assemblies (manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may potentially absorb moisture from air and subsequently cause corrosion). Clear residue can be easily removed by hot air, foam swab and basic solvents like isopropanol.
BulletPoint5 : Industrial air-syringe intended for professional use with pneumatic dispensing machines, do not remove the piston stopper! Do not discard original nozzle cap, tighten the cap while not using the flux - flux may dry out upon extended contact with air. Use supplied dispensing tip and plunger to manually control the flow. Keep in a room temperature - do not refrigerate.
Color : Yellow
Department : unisex-adult
ExteriorFinish : Silver
ExternallyAssignedProductIdentifier1 : 0347918024576
ExternallyAssignedProductIdentifier2 : 347918024576
GpsrSafetyAttestation : 1
Hazmat : 9
ImportDesignation : Imported
IncludedComponents : No
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
ItemDisplayDimensions_Height : 0.08 inches
ItemDisplayDimensions_Length : 11.02 inches
ItemDisplayDimensions_Width : 8.66 inches
ItemDisplayWeight : 0.44 pounds
ItemName : Hydra-UHF-TF no-clean universal halogen-free soldering tacky paste flux (REL0) - 10g syringe kit – water-soluble residue with QC-tracer
ItemPackageDimensions_Height : 11.2014 centimeters
ItemPackageDimensions_Length : 3.7084 centimeters
ItemPackageDimensions_Width : 9.1948 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solder-flux
Manufacturer : STIRRI
Material : pp
Material1 : foam
Material2 : copper
Material3 : Material
Material4 : Material
ModelName : plplaaoobfiumt4n7x
ModelNumber : 5572-001
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : TF-YHF-010-KIT
ProductDescription : STIRRI Hydra-UHF-TF is a worlds first halogen-free solder flux with water-soluble residue. Traditionally products with water-soluble residue are meidum or high activity, Hydra-UHF is L0 but also halides-free and halogen-free featuring some of the unique properties used by the OEM manufacturers for BGA rework/reballing. This solder flux ensures no copper mirror breakthrough and has a low electrochemical migration of less than 1 decade drop.

Solder Paste for Electronics – Efficiency and Practicality in One Product

This tacky flux is nearly odorless. Its translucent material ensures more visibility so you can easily reposition the pieces for more precision. The flux syringe is very easy to maneuver, allowing you to work with accuracy and avoid spills. The electronics soldering flux in amber syringe tube has an extended shelf life of up to 2 years.

Some features to keep in mind about our soldering flux paste:

1. No-clean formulation
2. Not corrosive
3. No halides <0.05%
4. No copper mirror breakthrough
5. Maintains stable performance under extended exposure to heat
6. Suitable for multi-step assembly
7. Contains QC-Aid glowing in UV for instant PCB contamination inspection
8. Suitable for industrial component placement machines, handcraft rework, and hobbies
9. Quantity: 5g
10. Ensures an excellent activation and suspension environment for BGA solder balls or making high quality SMD solder paste for BGA or stencil printing using HT solder powders
Work with precision and rigor using our amazing electric hot-temperature solder flux!
ProductSiteLaunchDate : 2024-08-18T06:51:41.012Z
Size : 10g kit
Style : 10g kit
SupplierDeclaredDgHzRegulation : ghs
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800
WarrantyDescription : Manufacturer warranty for 90 day