Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : This soldering iron hand tool is used in soldering electrical components and supplies heat to solder so that it can into the joint between two work pieces
BulletPoint10 : CH3-Standby Temperature Setting: Long press CH3 when the soldering station is turned off, and then turn on the power, you can enter the standby temperature setting interface, and press the upper and lower buttons to adjust the standby temperature, respectively 0 °C/150 °C/180 °C/200 °C, set 0 °C to turn off the standby temperature, short press ch3, save and exit.
BulletPoint2 : Heated metal tip to do the soldering work precisely and the sensitive components as well
BulletPoint3 : High quality ceramic heating core for long service time
BulletPoint4 : nsulated handle design makes it is and comfortable to operate
BulletPoint5 : 50W electric power soldering iron hand tool suitable for many kinds of soldering station and soldering works
BulletPoint6 : 3 TEMPERATURE MEMORY STORAGE： Adjust to the specified temperature, long press CH1, CH2, and CH3 can set the temperature, convenient for the next direct use.
BulletPoint7 : WARRANTY SERVICE ： All SUGON welding stations enjoy 12 months of quality warranty service. We have a professional team, if you have any questions about this product, please feel free to consult us, and we will reply to you immediately after receiving your message!
BulletPoint8 : CH1-Temperature Lock: Press and hold CH1 when the soldering station is off, and then turn on the power to either turn off or enable the temperature lock key.
BulletPoint9 : CH2-Buzzer: Long press CH2 when the soldering station is off, and then turn on the power to turn off or enable the buzzer.
Color : 5 Pin
ExternallyAssignedProductIdentifier : 7430988364062
ExternallyAssignedProductIdentifier1 : 787015351111
ExternallyAssignedProductIdentifier2 : 0787015351111
FinishType : Finish
GpsrSafetyAttestation : 1
HeatingElementType : Ceramic
IncludedComponents : Soldering Iron
ItemLength : 7.48 inches
ItemName : Electronics Soldering Iron, 50W Soldering Iron Solder Station Repair Tool with A1322 Heating (5 Pin)
ItemPackageDimensions_Height : 23.8 centimeters
ItemPackageDimensions_Length : 5.6 centimeters
ItemPackageDimensions_Width : 6.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : soldering-stations
LowerTemperatureRating : 80 degrees_celsius
Manufacturer : Garosa
Material : copper
ModelName : MX-5220
ModelNumber : MX-5220
NumberOfChannels : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : Garosah86zuwd543-02
PowerSourceType : Electric
ProductDescription : Specifications:
Condition: brand new
Material: metal, rubber
Heating Type: A1322 
Color: as picture shown
Type: 5 Hole, 5 Pin (optional)
Power: 50W
Voltage: DC 24V 
Replacement handle: for 936 937 898D
Length: approx. 19cm / 7.48inch
Weight: approx. 83g

Usage:
1. Welding can be carried out 2 minutes after the electricity
2. Can be used at welding temperature.
3. Unplug the power if not used for long time to extend life of the heater and iron head.
4. Tin should be kept on iron in use and after use.

Attentions:
1. Strong acidic flux is avoided for welding.
2. In use, iron can not be knocked and black oxide in the head.
3. Thermo elements andiron are strictly prohibited to be demolished or replaced when iron is in electricity.
4. It is normal for heating elements to have a slight fever with smoke after the first electricity, they'll disappear after 10 minutes.
5. The configured iron base and welding materials should be grounded reliably.
6. Power wires and heating core should be replaced by full-time staff when they do not work well.

Package Included:
1 * Soldering Iron 

Notes:
Please take care of yourself while using this item.

ProductSiteLaunchDate : 2019-05-22T08:30:55.885Z
SpecificUsesForProduct : Electronics
Style : Pencil
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureStability : High degrees_celsius
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 480 degrees_celsius
Voltage : 120 volts
Wattage : 50 watts