Cart 2 india

Specification
Brand : FEITA
BulletPoint1 : √ Hot Air Soldering Station Zero-crossing triggering temperature control of microcomputer; Auto-cooling function, high-quality heating materials, long service life.
BulletPoint2 : √ High power, rapid rise of temperature, high and stable temperature;LED digital display, when the temperature is less than 70 degree, can stop rotation automatically.
BulletPoint3 : √ Adjust the air flow and temperature control keypad. Large and soft air flow via handle of rework station, air flow can be modulated via the knob.
BulletPoint4 : √ Brushless fan with soft air; Noise: Less than 45dB, has a long life span and little noise; Safely remove BAG- IC,keep pins intact.
BulletPoint5 : √ Soldering rework station operating voltage: 110V; Output Power: 500W; Air flow: Max. 120L/min; Component Length of Handle: ≦120cm.
BulletPoint6 : √ Automatic sleep & over temperature protection function: : I. Put the hot air handle on the bracket with the head facing upwards to stop the heat and only blow out air; II. When used 858D hot air gun's temperature exceeds 600 ℃, stop heating and only blow out air. All can extend the life of the heater and protect the hot air gun.
BulletPoint7 : √ FEITA 858D desoldering station kit includes: 1pc main unit, 1pc hot air gun handle, 3pcs Hot air round nozzles (3mm/0.11in, 5mm/0.20in, 75mm/0.30in), 1pc Spare Heating Element, 1pc US power cord, 1pc anti-static tweezer, 1pc hot air gun holder, 1pc manual.
Color : As Picture Shown
ExternallyAssignedProductIdentifier : 6954504077737
ExternallyAssignedProductIdentifier1 : 0677222623104
ExternallyAssignedProductIdentifier2 : 677222623104
GpsrSafetyAttestation : 1
HeatingElementType : Ceramic
IncludedComponents : FEITA Control Temperature Station 1pc, Hot air gun handle 1pc, Air nozzle 3pcs, Spare heating element 1pc, ESD curved tweezer 1pc, Desolder holder 1pc, manual 1pc
ItemLength : 7.48 inches
ItemName : FEITA 858D Hot Air SMD Rework Station Digital Soldering Heat Gun Tool Kit with Desoldering Iron Holder, 3 Nozzles, 1 Spare Heating Element, 1 ESD Curved Tweezer & Extras Accessories
ItemPackageDimensions_Height : 21.6 centimeters
ItemPackageDimensions_Length : 18.1 centimeters
ItemPackageDimensions_Width : 21.3 centimeters
ItemPackageQuantity : 1
ItemShape : Soldering Station
ItemTypeKeyword : soldering-stations
LowerTemperatureRating : 100 degrees_celsius
Manufacturer : FEITA
Material : Plastic,metal, circuit board, led
ModelName : Soldering Station
ModelNumber : FT858D
NumberOfChannels : 1
PartNumber : FT858D
PowerSourceType : ac
ProductDescription : Operation Instruction:

1. To put the unsoldering equipment ready, and leave handle on the holder, connect the power, set the blast nozzle(large caliber nozzle preferred).

2. To switch on the power, the screen display"-",it represents standby model (Available in microcomputer with digital LED)

3. To press▲or▼ button (revolving switch )as to set up the temperature. (Available in microcomputer with digital LED)

4. To turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication)

5. To hold the handle, so the equipment begin to heat. To adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table.

6. To put back the handle on the holder after the work; meanwhile,the unsoldering equipment switch from heating mode to cooling heating element mode automatically. while the temperature is lower than 100C,the screen displays"-", it stands for switching to standby mode,and after the temperature of heating element is less than 70C,the equipment is on standby.

7. To switch off the power unplug if there is no operation for a long period of time.

Application:

1.Soldering and de-soldering the most of the SMD component, such as SOIC, CHIP, QFP, PLCC, BAG and so on

2.De-solder different shielding boxes or shielding covers conveniently. Make heat shrinkage for the heat-shrink tube and the PVC tube

3.Warm-up the mini-type metal and the mechanism, relax firm components

Package Include:

1x FEITA 858D SMD Hot Air Rework Station
1x Hot air gun handle
1x Handle holder
3x Nozzles(3mm,5mm,8mm)
1x User guide
1 x Spare Heating Element
1 x anti-static tweezer

ProductSiteLaunchDate : 2019-06-25T07:00:00.000Z
Style : Pencil
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureStability : 285 degrees_celsius
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 896 degrees_fahrenheit
Voltage : 110 volts
Wattage : 500 watts