Cart 2 india

Specification
Brand : REGENI
BulletPoint1 : 3 steps of temperature profile saved and automatic control of temperature and heating time
BulletPoint2 : 1~5 program are factory setting, program 6~9 is available to change and save new setting value
BulletPoint3 : 6 pieces Magnetic PCB holding blocks hold less than 200mm x 150mm PCB
BulletPoint4 : 1 size Top and Bottom nozzle (15X15mm or 19x19mm) are included. If additional nozzle are required, please send us message, there are other existing nozzles like 18x28mm top, bottom, etc.
BulletPoint5 : Several other guide kits available, with and without perforation (optional)
BulletPoint6 : LOW TOTAL COST OF OWNERSHIP - Up to 70% less reduced tip consumption and provide a low total cost of ownership by saving labor time & ressources due a higher productivity.
ExternallyAssignedProductIdentifier : 7427270140510
IncludedComponents : Main body, 1 size Top, Bottom nozzle, 6pcs Magnet PCB holder
IncludedComponents1 : (1) ALU Auto-Feed Control Unit (guide components assembled)
IncludedComponents2 : (1) ALE250 Auto-Feed Iron
IncludedComponents3 : (1) ALES Stand for ALE250 FOR Iron
IncludedComponents4 : (1) C250403 Conical Bent Cartridge Ø 1
IncludedComponents5 : (1) GALE10V Guide Kit 1mm for ALE250 w perforation
IncludedComponents6 : (1) P405 Pedal
IncludedComponents7 : (1) SCH Cartridge Holder
IncludedComponents8 : (1) PLR195 Cartridge Extractor Plier
ItemName : REGENI BK200S Made in Korea 3Steps Reflow Execution BGA Rework Station soldering desoldering cell phone connector Main CPU rework system
ItemPackageDimensions_Height : 54.8894 centimeters
ItemPackageDimensions_Length : 28.2956 centimeters
ItemPackageDimensions_Width : 35.9918 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : soldering-stations
LowerTemperatureRating : 230 degrees_celsius
Manufacturer : REGENI Co.,Ltd.
Material : copper
ModelName : Rework system
ModelNumber : BK200S
NumberOfChannels : 3
NumberOfItems : 1
PartNumber : ALE-110VA
PowerSourceType : AC220V or AC110V
ProductDescription : REGENI develops and produces economical BGA Rework station BK200S with 3 steps of automatic temperature and time control to exert similar effect with expensive BGA rework station or similar temperature effect as reflow oven by verified heating effect with Korean Electronic makers, SMT makers etc. BK200S can hold small PCB of less than 200x150mm compared to Hot Air Gun, max teperature does not reach 350 to 400 celsius degrees but from 230 to 270 celsius degrees most of components can be desoldered. By REGENI internal test, 1 way Hot air blowing effect has about 120 degrees temperature gap between top and bottom of target component. Hot air gun blowing may cause discoloring PCB or risk of damaging wire inside IC mold, Thus targeting service centers to experience similar heating effect at much lower cost
ProductSiteLaunchDate : 2022-07-22T05:15:42.551Z
Style : Soldering Station & 1.0mm Solder Wire
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 270 degrees_celsius
Voltage : 120 volts
Wattage : 40 watts