Cart 2 india

Specification
Brand : Yunir
BulletPoint1 : MINI THERMOSTAT: Smart thermostatic heating table in super mini size with 3D printed shell without layering
BulletPoint2 : FUNCTIONS AND EFFECTS: The heating soldering plate can eliminate redundant functions, retain enough effective heating area, greatly saving energy consumption and heating time
BulletPoint3 : DISPLAY AND CONTROL: Welder hot plate with Organic Light Emitting Diode screen display, support temperature control
BulletPoint4 : LOW LOSS: The application field of the soldering hot plate is wide, and the operating parts are centrally preheated to reduce the damage to nearby parts
BulletPoint5 : FAST AND EFFICIENT: Chip welding station supports USB Type C interface and PD protocol for faster heating speed
IncludedComponents : No
ItemName : Soldering Station Hot Plate, LED Welder Hot Preheating Chip, 20V Mini Smart Thermostat for Repair DIY Laboratory, Electric Preheat Rework Heater Lab
ItemPackageDimensions_Height : 6.2 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : soldering-stations
Manufacturer : Yunir
ModelName : Yunir6ec9ugd4t3
ModelNumber : Yunir6ec9ugd4t3
NumberOfChannels : 1
PartNumber : Yunir6ec9ugd4t3
PowerSourceType : ac/dc
ProductDescription : Spec:
Item Type: Heating Soldering Plate
Input Interface: Type C
Power Supply: PD65W 20V 3.25A (PD65W recommended)
Temperature Range: 0℃~350℃ (the lowest temperature is ambient temperature, can only be increased, can not be reduced)
Shell: 3D printed shell, no layering
Product Size(LxWxH): Approx. 5.6 x 5.6 x 3.5cm / 2.2 x 2.2 x 1.4in

How to Use:
1. Double Keys Pressed At The Same Time: Heat or stop heating
2. Press and hold twice to enter the menu screen or exit
3. Press and hold the double key to confirm

PackageList:
1 x Heating Soldering Plate

Note:
1. The recommended temperature should not exceed 250℃.
2. The power supply needs a charger that supports the PD protocol, the voltage is 20V 3.25A, and the voltage that can support the PD protocol is 20V in theory.
ProductSiteLaunchDate : 2024-10-11T04:57:15.101Z
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureStability : 350 degrees_celsius
UnitCount : 1
UnspscCode : 41112209
UpperTemperatureRating : 350 degrees_celsius
Voltage : 20 volts
Wattage : 65 watts