Cart 2 india

Specification
Brand : PUHUI
BulletPoint : WELLER SWITCH ASSEMBLY, FOR USE WITH : WELLER WTCPT SOLDERING STATION 96-030
BulletPoint1 : Infrared heating doesn't generate sirocco flow,and it doesn't damage the small components.Because of these merits ,the machine is to be heated evenly in using huge penetrating power.
BulletPoint2 : The desoldering station is dedicated to fixing laptop,computer,and other electronic devices .It is suitable for the most of circuit boards ,especially for Micro BGA component.
BulletPoint3 : Even though you never use this bizarre item and read those elaborated user manuals, we still can promise you to operate it thoroughly .Furthermore，the user manual is a CD that contains more fun compared with reading a book.
BulletPoint4 : This sophisticated equipment takes advantage of an advanced technology that named infrared weld ,and the experts of this enterprise invented infrared heating devices.
BulletPoint5 : The machine is stocked with 800W preheat sol system . The preheat range is 240x180mm , which is a large area in comparison to other kinds of infrared rework station.
ExternallyAssignedProductIdentifier1 : 0661021345404
ExternallyAssignedProductIdentifier2 : 661021345404
ExternallyAssignedProductIdentifier3 : 00816353012818
IncludedComponents : cd,user manual
ItemName : T-870A Infrared Heating Rework Station, BGA IRDA Iron Welder 110V/220V
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : soldering-stations
Manufacturer : PUHUI
Material : iron
ModelNumber : MX-500S
NumberOfItems : 1
PartNumber : 645-100
PowerSourceType : 110v,220v
ProductDescription : The main parameters
Model:T-870A
Work floor size:360X240mm
Machine power:1000W(220V)
The lamp body heating power:150W
Voltage/frequency:AC220-230v 60/50Hz
The heating power at the bottom:800W (220V)
Infra-red lamp body heating size:Φ70mm(50x50mm)
The preheating range at the bottom:240*180mm
Infra-red lamp body temperature:200℃-350℃
Preheating chassis temperature: 60℃-200℃

Packing List
1 x T-870A Welding table main body
1 x Infra-red lamp body
1 x Temperature sensor
1 x PCB board bracket
1 x Power Cable (200VAC)
1 x User Manual

Note:
(1) Check if the connection wire of the lamp body, the Temp-sensor and power cable is ok.
(2) Turn on the power switch. Allow the T-870A Power-On-Self-Test (POST) to complete. After this, Temperature set-points will display last value used.
(3) The front panel has two switches, control the preheating dish and the infra-red lamp body separately

ProductSiteLaunchDate : 2017-12-18T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword1 : Workbench
TargetAudienceKeyword2 : Repair Bench
UnitCount : 1
Voltage : 120 volts
Wattage : 40 watts