Cart 2 india

Specification
Brand : Duda Diesel
BulletPoint1 : Working Pressure: 0-5 Bar (0-71 psi) - Closes at Zero Pressure / No Fluid Pressure Requried
BulletPoint2 : 304 Stainless Steel Body, Viton Diaphragm, Temperature Range: -10°C - 130°C (26°F - 266°F)
BulletPoint3 : NEMA Protection Class: IP65, Warranty: 1 Year, Orrifice Size: 35mm, cv Value: 24
BulletPoint4 : Lifespan:100,000-150,000 Switches, Wiring Connection: DIN Connector: easy to install wiring terminal
BulletPoint5 : Suitable for water, hot water, steam, gas, air, oils, Vacuum, light alkali & light acids
Color : Black
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 8008661076633
ExternallyAssignedProductIdentifier1 : 840194110501
ExternallyAssignedProductIdentifier2 : 0840194110501
GpsrSafetyAttestation : 1
IncludedComponents : 2 Solenoid Repair Kit
ItemDisplayWeight : 0.9 pounds
ItemName : 24v AC 35mm Normally Open 1-1/4" NPT Stainless Steel Viton 2-Way Solenoid Valv...
ItemPackageDimensions_Height : 9.4996 centimeters
ItemPackageDimensions_Length : 6.5024 centimeters
ItemPackageDimensions_Width : 9.398 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-solenoid-valves
Manufacturer : Duda Diesel
Material : Stainless Steel
MaximumOperatingPressure : 100 pounds_per_square_inch
ModelName : Hand lever valve 4/3 way
ModelNumber : 2WJ32032KN:24vac
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : 2WJ32032KN:24vac
ProductDescription : A two way solenoid valve means that there are 2 ports in which fluid flows from/to. The Direct Acting valves will stop flow in either direction, but are still only designed to allow full flow in a single direction. Semi-Direct acting valves require assitance from fluid flow to open. These 2W valves may be used with 0 psi working pressure. However, while they do not require pressure from the working fluid to remain open or remain closed, these semi-direct lift valves do require some assistance from the flow of the working fluid for the initial opening/closing. Some gravity flow applications may have trouble overcoming the static friction of the seals within the valve while initially opening or closing and therefore the valve may not function properly in some low flow or low pressure applications.General purpose 2-way direct acting and semi-direct lift acting valves. Common applications include water, oil (below 20cst), air, gas, freon, *vacuum, weak acids & weak alkali. Check chemical compatibility charts for the valve body and seals of the valves to see if they are compatible in the case of using a weak acid/base. The Semi-Direct Lift valves will partially open or close from activation, and require fluid assitance to prop open or closed. They can only stop flow in one direction, which is indicated by the arrow on the body of the valve. If pressure is applied in the opposite direction, the valve will be opened and allow a slow trickle of fluid in the opposite direction. These valves should only be used for stopping flow in one direction. If preventing of backflow is required, a check valve should be placed in the line after the solenoid valve. Direct acting valves switch on their own with no fluid assitance and can block fluid flow in both directions.
ProductSiteLaunchDate : 2017-02-11T08:41:30.927Z
Size : SUS304 | 1-1/4"
SpecificationMet : NEMA
SpecificationMet1 : ASME B16.34
SpecificationMet2 : MSS SP 72
Style : 24 VAC
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : solenoid valve