Cart 2 india

Specification
Brand : Farmer Bob's Parts
BulletPoint1 : ♦ For pressure to 65 PSI (4.5 bar). ♦ Flow Rate: 8 GPM (30 l/min) at 5 PSI (0.34 bar) pressure drop, 11 GPM (42 l/min) at 10 PSI (0.69 bar) pressure drop. ♦ Fabric-reinforced Viton diaphragms. ♦ Nylon encapsulated 12 VDC coil with 1⁄4″ Quick Connect terminals. ♦ Power requirement 2.5 amp. ♦ Glass-filled polypropylene (black) valve body. ♦ Internal metal parts are stainless steel. ♦ No stroke adjustment needed. ♦ Corrosion resistant, 430SS solenoid grade armature and armature stop.
BulletPoint2 : 144F-1-3, 144F13, 69FM100, AA144F13, SSAA144F13
BulletPoint3 : Flow Rate: 15 gpm @ 5 psi pressure drop, 21 gpm @ 10 psi pressure drop
BulletPoint4 : Ports Sizes: 1" NPT inlet, 1" NPT outlet
BulletPoint5 : Fiberglass reinforced nylon body, EPDM diaphragms and seat washers, stainless steel wetted parts
BulletPoint6 : Current : 1 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
BulletPoint7 : Suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel. Not Suitable for gasoline.
BulletPoint8 : Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-180 °F (-10~80 °C).
BulletPoint9 : Weight of solenoid valve : 14 oz Solenoid Valves are backed with our 1 Year Warranty
Color : Silver & Black
ExteriorFinish : Metal,Polypropylene,Stainless Steel
ExternallyAssignedProductIdentifier : 7500652699810
ExternallyAssignedProductIdentifier1 : 0767908205912
ExternallyAssignedProductIdentifier2 : 767908205912
IncludedComponents1 : Electromagnetic Coil Solenoid 24V AC
IncludedComponents2 : Brass NPT thread body 1/4 Inch Normally Open
ItemName : TeeJet Solenoid Foam Marker Valve Directovalve Farmer Bob's Parts AA144F-1-3
ItemPackageDimensions_Height : 9.4 centimeters
ItemPackageDimensions_Length : 5.4 centimeters
ItemPackageDimensions_Width : 8.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-solenoid-valves
Manufacturer : TeeJet Technologies
Material : Foam
Material1 : Brass port
Material2 : Seal/Diaphragm : NBR (aka Buna-N, Perbunan, and nitrile rubber)
Material3 : Coil : Copper wire in resin-molded casing
MaximumOperatingPressure : 145 pounds_per_square_inch
ModelName : Industrial Electric Valve Solenoid Valve NPT thread Normally Open 1/4 inch, 24V AC
ModelNumber : Normally Open 1/4 inch , 24V AC
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : AA144F-1-3
ProductDescription : The 144P-1-3 three-way solenoid-operated DirectoValve control valve was specifically designed to provide bypass control in spraying applications. When used with part number 23520-PP throttling valve or a 4916 metering orifice plate in the bypass line, it can provide for a constant pressure spray system. ♦ For pressure to 65 PSI (4.5 bar). ♦ Flow Rate: 8 GPM (30 l/min) at 5 PSI (0.34 bar) pressure drop, 11 GPM (42 l/min) at 10 PSI (0.69 bar) pressure drop. ♦ Fabric-reinforced Viton diaphragms. ♦ Nylon encapsulated 12 VDC coil with 1⁄4″ Quick Connect terminals. ♦ Power requirement 2.5 amp. ♦ Glass-filled polypropylene (black) valve body. ♦ Internal metal parts are stainless steel. ♦ No stroke adjustment needed. ♦ Corrosion resistant, 430SS solenoid grade armature and armature stop.
ProductSiteLaunchDate : 2018-11-21T16:32:13.214Z
SpecificationMet : cv
SpecificationMet1 : DIN
SpecificationMet2 : NPTS
SpecificationMet3 : DIN
SpecificationMet4 : NBR
SpecificationMet5 : NPTS
StreetDate : 2017-06-08T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : solenoid valve
Voltage : 24 volts_of_alternating_current