Cart 2 india

Specification
Brand : XYRSTOLR
BulletPoint : The Murphy RP2310B is a 24 Volt Push/Pull DC Solenoid that gives a one and a half inch stroke at 14 pounds, and holds up to 34 pounds at full voltage, continuous duty.
BulletPoint1 : 【Parameters】- Rated Voltage: DC 12V; Type: Pull Push; Rated Current: 400mA: Force / Stroke: 25N/10mm; Body Size: 39 x 26 x 22mm/1.54" x 1.02" x 0.87"(L*W*T); Plunger Bar Size: 9 x 73mm/0.35" x 2.87"(Max.D*L)
BulletPoint2 : 【GOOD DESIGN】- Push pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet. Less power consumption, low temperature rise, no magnetism when power off.
BulletPoint3 : 【ADVANTAGES】- Simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity. It can be installed flexibly and quickly, which is very convenient.
BulletPoint4 : 【NOTED】- As an actuating element of equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 68 seconds.
BulletPoint5 : 【WIDE APPLICATION】- DC solenoid electromagnet use in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,door lock,etc.
CircuitType : 2-way
Color : Blue
ConnectivityProtocol : X-10
ConnectorType : Screw Terminal
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 711811401213
ExternallyAssignedProductIdentifier2 : 0711811401213
FitType : Universal
IncludedComponents : Push Pull Solenoid
InternationalProtectionRating : IP541
ItemName : Push Pull Type Solenoid DC 12V 400mA 25N/10mm Open Frame Type Solenoid Linear Motion Solenoid Electromagnet JF-1039B-12V Solenoid
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : electronic-component-solenoids
Manufacturer : XYRSTOLR
Material : Metal
ModelNumber : BM-S1670DL
MountingType : Flange Mount
NumberOfItems : 1
NumberOfPieces : 1
NumberOfPositions : 1
OperatingVoltage : 24 volts
OperationMode : manual
PartNumber : XYR000221-ZF
ProductDescription : Features:
Pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet.
Support DC 12V voltage, high power, pull type, linear motion, is easy to install.
DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc.

Specification:
Material :Metal
Force: 25N ;
Travel: 10mm; Rated Voltage: DC 12V;
Mounting Hole Dia.: M3;

Package Content: 1 x DC Solenoid Electromagnet

Note:
Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.If the operate time is too long,the electromagnet temperature will rise.Too high temperature can affect the life of the electromagnet. Please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using eelectricity, so as not to damaged the electromagnet.
ProductSiteLaunchDate : 2024-11-06T15:13:21.746Z
PullForce : 55 pounds
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Push Button
TerminalType : Screw
UnitCount : 1
UnspscCode : 24101600
Voltage : 12 volts
Wattage : 9.6 watts