Cart 2 india

Specification
Brand : AEDIKO
BulletPoint1 : 8 Channel Relay Module’s Path Can Be Triggered By High Level or Low Level Through Jumper Setting; Trigger Current of Opto-Isolator: 5mA
BulletPoint2 : This 5V Relay Module is 8 Channel Isolated, Each Relay Can Individually Switch On/Off By An Opto-Isolated Digital Input
BulletPoint3 : 5V 8 Channel Relay Module Comes with High-Current Relay,Maximum Load: AC 250V 10A;AC 125V 15A ; DC 30V 10A
BulletPoint4 : This Module Design With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
BulletPoint5 : The Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled By a Wide Range of Microcontrollers Directly
ConnectorType : Through Hole
ConnectorType1 : Screw
ConnectorType2 : Clamp
CurrentRating : 5 milliamps
ExternallyAssignedProductIdentifier1 : 701715484993
ExternallyAssignedProductIdentifier2 : 0701715484993
ExternallyAssignedProductIdentifier3 : 00813101021580
IncludedComponents : 1 6Amp SPDT Relay
ItemName : AEDIKO 8 Channel Relay Module DC 5V Relay Board with OPTO-Isolated Support High or Low Level Trigger
ItemPackageDimensions_Height : 19.7104 centimeters
ItemPackageDimensions_Length : 2.5908 centimeters
ItemPackageDimensions_Width : 16.891 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : solid-state-relays
Manufacturer : AEDIKO
Material : lead
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem : Metric
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : AE19531
MountingType : Screw Mount
NumberOfItems : 1
OperatingVoltage : 5 volts_of_direct_current
OperationMode : Off
PartNumber : AE19531
ProductDescription :

Relay Module Parameters:

Channel: 8 Channel

Working Voltage: DC 5V

Normally Opened Compatible Load: AC 250V/10A, DC 30V/10A

Quiescent Current: 5mA

Maximum Current: 190mA

Trigger Current: 2 - 5mA

Trigger Voltage (LOW): 0 - 1.5V

Trigger Voltage (HIGH): 2.5 - 5V

Action Time (Under Rated Voltage): Less Than 10ms

Release Time (Under Rated Voltage): Less Than 5ms

Power Indicator (Green), Relay Status Indicator (Red)

Friendly Interface Design. All Interfaces Can Be Connected Directly Via Terminal Wiring Leads.

Module Size: 13.8 x 5.5 x 1.8cm/5.4" x 2.2" x 0.7"(L*W*H)

Input Interface:

DC+ : Connect The Positive Pole Of The Power Supply

DC- : Connected The Negative Pole Of The Power Supply

IN1 - IN8 : According The Setting of Way, The Corresponding Of Relay Can Be Controlled By High or Low Level

Output Interface:

24 Interfaces: All Interfaces Can Be Directly Connected To Facilitate User Access

NO1--NO8: The Relay Normally Open Interfaces,The Relay Is Suspended Before The Suction and It Is Short-Circuited With COM After The Suction

COM1--COM8: Common Interfaces of the 8 Channel Relay

NC1--NC8: Normally Closed Interface of Relay and It is Shorted to COM Interface Before The Suction is Closed

High and Low Trigger Selection:

S1-S8 are the High and Low Level Trigger Selections of Relay 1 to 8 in Sequence

COM is Shorted With Low, the Corresponding Relay is Triggered By Low Level and when COM is Shorted With High Terminal, It is Triggered by High Level

Package Contents:

1x 8 Channel Relay Module with Optocoupler Isolation

ProductSiteLaunchDate : 2021-08-16T07:00:00.000Z
Size : 5V
SpecificationMet : Ma
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39122300