Cart 2 india

Specification
Brand : Ferwooh
BulletPoint : 1
BulletPoint1 : 【Relay module】 5V 1 channel relay module. High-quality relays with normally open connections for maximum loads of AC 250 V / 10 A and DC 30 V/ 10 A. The relay module is designed for use in a wide range of applications.
BulletPoint2 : 【High and low level triggering】 Each path of the relay module board can be set via jumpers for high or low level triggering, with fault-tolerant design, even if the control line is disconnected, the relay will not work. The module can be set to high or low, triggered by jumpers.
BulletPoint3 : 【Isolation design】The relay board is isolated with chip optocoupler to ensure strong driving, and the isolation circuit prevents the relay switching current from damaging the I/O port. Stable performance, release current 5 mA.
BulletPoint4 : 【Practicality】The relay board is equipped with 1 interface, user-friendly design, input and output terminals and simple wiring. The board is surrounded by 4 mounting screw holes with a diameter of 3.1mm for easy installation and fixing.
BulletPoint5 : 【High availability design】 This single-channel relay module features a fault-tolerant design. Even if the control line is disconnected, the relay will not work. Power indicator (green), relay status indicator (red).
Color : BLACK
ConnectorType : 1
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier : 3593150048710
ExternallyAssignedProductIdentifier1 : 0682863349245
ExternallyAssignedProductIdentifier2 : 682863349245
IncludedComponents : 1
InputVoltage : 12 volts
ItemDisplayDimensions_Length : 74 millimeters
ItemName : Ferwooh 3PCS DC 5V Relay Module 1 Channel Relay Board Shield with Optocoupler Support High/Low Level Trigger Relay Switching Module Expansion Board
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : solid-state-relays
Manufacturer : Ferwooh
Material : lead
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem : Metric
ModelName : Solid State Relay SSR G3MB-202P 240V AC/DC / 2A Load 12V 10mA Control
ModelNumber : 1500-C-L1-S7-OC-X
MountingType : 1
NumberOfItems : 3
NumberOfLithiumMetalCells : 1
OperatingVoltage : 12 volts
OperationMode : Automatic
PackageLevel : unit
PartNumber : 270002
ProductDescription : Special feature:

1. the module uses high -quality relays, usually open interfaces. Maximum load: AC 250 V/10 A, DC 30 V/10 A;

2. with SMD optocopper isolation, driving ability, stable performance; Trigger current 5MA;

3. the module voltage is 5 V;

4. the module can be set to high or low by jumper;

5. fault -tolerant design, even if the control line is interrupted, the relay does not work;

6. the operating display (green), relay status display (red);

7. interface design human, all interfaces can be connected directly via connection cables, very practical;

8. module size: 50 mm * 26 mm * 18.5 mm;

9. has four fastening screw holes, hole 3.1 mm, 44.5 mm * 20.5 mm distance.

Module interfaces:

1. DC +: Positive power supply (voltage required by the relay)
2. DC-: Negative power connection
3. IN: can be a tax relay for high or low level

Relay outputs:

1. NO: Usually open relay interface, the relay is short -circuited after pulling with com;
2. COM: common interface relay;
3. NC: Usually closed relay interface relay with COM short-circuited, after the pull leader.

High and low level trigger selection terminal:
1. When the jumper is short circuited to LOW, it is triggered at a low level;
When the jumper is short circuited to high, it triggers a high level.

Package include:
3x 1 channel 5V relay module with Optocoupler supports High and Low Trigger
ProductSiteLaunchDate : 2024-03-27T08:20:37.998Z
Size : CDG1-1DD 40A
SpecificationMet : Ma
Style : 2
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 32000000