Cart 2 india

Specification
Brand : AITIAO
BulletPoint1 : 9 Way Trigger Port: Voice playing module is designed with 9 way high pressure and high temperature resistant trigger ports. Without programming, you can directly connect the trigger button to realize a variety of playing modes, such as single cycle, sequential play, etc.
BulletPoint2 : 30W Voice Playback Module: DY-HL30F is a DC 12V 24V 30W Mono Voice Playback Module. Supports MP3 and WAV decoding formats; 9 tracks can be triggered in sections.
BulletPoint3 : Built-in 64Mbit Flash Storage: Voice module features 64Mbit (8M bytes) of internal storage and can be connected to a computer via the included USB cable for audio file replacement.
BulletPoint4 : Two Indicator Lights: The mp3 voice module has two indicator lights, respectively pointing to the state of power supply and playback. This will be very helpful for you to observe the working status of the voice module, convenient operation.
BulletPoint5 : Warning Device: AITIAO Voice Broadcast Device can be connected with external buzzer or light alarm. It can be used as the alarm device for families, supermarkets and warehouses. You can freely change the alarm effect or sound you want.
CompatibleDevices : Speakers, Computers (PCs, laptops, tablets), Microcontrollers (Arduino, Raspberry Pi models), External buzzer, Light alarm
ConnectivityTechnology : USB, Trigger Port
ExternallyAssignedProductIdentifier1 : 0687117749765
ExternallyAssignedProductIdentifier2 : 687117749765
IncludedComponents : 30W Voice Playback Module
ItemName : AITIAO 1PCS 30W Voice Playback Module, DC 9-24V Sound Module Music Player Voice Broadcast Device 9 Trigger Interfaces 8 I/O Trigger Modes Built-in 64Mbit Flash Storage
ItemPackageDimensions_Height : 0.2 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemTypeKeyword : sound-modules
Manufacturer : AITIAO
MemoryStorageCapacity : 67108864 bytes
ModelName : 30W Voice Playback Module
ProcessorCount : 1
ProductDescription :

30W Voice Playback Module Features:

1>. DC 9-24V wide voltage power supply

2>. 9-Channel one-on-one trigger interface, triggering up to 9 music

3>. Low level trigger version and directly using GND as a trigger signal

4>. Supports MP3 and WAV decoding formats, and audio file sampling rates up to 48KHz

5>. Built-in 64Mbit Flash Storage

6>. Micro USB Socket: Connect to PC and download music files.

7>. Equipped with a 30W Class D power amplifier, it can directly drive 4-8ohm, 10-30W speakers

8>. External warning lights can be connected and voltage is same to input voltage

9>. DIP switch is set with 8 trigger working modes

10>. Potentiometer and volume button adjusts volume

11>. Module Size:76*58mm

12>. 3Bit Red Toggle Switch:Set 8 different triggering modes, which must be powered on again after changing the mode.

13>. Light/Alarm Output: Output voltage is the same to input work voltage. It can connect alarm/warning lights.

14>. Two Indicator: Green after power ON and red when playing. (For Power supply and Playback)

Please Note:

1>. Inter-CutTriggermodeapplication, where background music is stored in the root directory, and insert music must be placed in the "CHABO" folder. No need "CHABO" folder in others play mode.

2>. The music file name must be a 5-digit number, for example: 00001.mp3 ~ 00009.mp3

3>. Each input port can only control one music file such as S3 just can control music file 00003.mp3.

Wide Application:

1>. Modified/repair/replace speaker

2>. Amplifier equipmentfor training/activity siteand so on

3>. Car Bluetooth device

4>. DIY Bluetooth Speakers

ProductSiteLaunchDate : 2024-08-22T07:30:19.848Z
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 1
UnspscCode : 52161500
WarrantyDescription : 1