Specification Brand : Pwshymi BulletPoint1 : Adjustable: A driver board can control two VU meters and three potentiometers, with efficient working, can adjust brightness or dark for backlight board, and also adjust the amplitude of the pointer swing, is a good helper of the recording engineer. BulletPoint2 : Clear Readings: Equipped with backlight, the VU meter for recording studio has clear readings for users even in dim conditions, convenient and safe. BulletPoint3 : Easy Operation: With 2 ABS VU meters and 1 drive board, you will not worry about finding the right drive board and wiring problems, the wiring operation of the PCS VU meter module is simple and novice can easily start. BulletPoint4 : Wide Application: The VU meter with driver board is suitable for DIY, home audio, car audio conversion, recording studio, medical equipment and so on. BulletPoint5 : Premium Material: Made of premium ABS and PCB, the VU meter is and sturdy, has a long service life, non and non odor, safe for you to use. Color : One Color ExternallyAssignedProductIdentifier : 7505562030258 ItemName : ABS VU Meter, Accurate Easy Opeation VU Meter Module White Backlight for DIY ItemPackageDimensions_Height : 8 centimeters ItemPackageDimensions_Length : 13 centimeters ItemPackageDimensions_Width : 9 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : sound-and-noise-meters Manufacturer : Pwshymi ModelName : Pwshymivkbzyu9h3a ModelNumber : Pwshymivkbzyu9h3a NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : Pwshymivkbzyu9h3a ProductDescription : 1. Premium Material: Made of premium ABS and PCB, the VU meter is and sturdy, has a long service life, non and non odor, safe for you to use. 2. Easy Operation: With 2 ABS VU meters and 1 drive board, you will not worry about finding the right drive board and wiring problems, the wiring operation of the PCS VU meter module is simple and novice can easily start. 3. Adjustable: A driver board can control two VU meters and three potentiometers, with efficient working, can adjust brightness or dark for backlight board, and also adjust the amplitude of the pointer swing, is a good helper of the recording engineer. 4. Clear Readings: Equipped with backlight, the VU meter for recording studio has clear readings for users even in dim conditions, convenient and safe. 5. Wide Application: The VU meter with driver board is suitable for DIY, home audio, car audio conversion, recording studio, medical equipment and so on.
Specification: Item Type: VU Meter Material: ABS, PCB Weight: Approx. 141g/4.97oz Color: As Shown Maximum Induced Current Density: 180uA±10% Internal DC Impedance: 650Ω±10% Insulation Impedance: Above 50MΩ Friction: ±1mm Pointer Length: 16.5±1mm Pointer Width: 0.45±0.05mm Meter Installation Position: Vertical Backlight: 2.8-3.8V Backlight Color: White Application: Suitable for DIY, Recording Studio, Medical Equipment, Etc
How to Use: For AC or DC 12‑16V power supply, it is necessary to distinguish between AC and DC input ends. The power amplifier output end to receive the letter. When wiring, L , G, R correspond to the left, ground and right channels of the audio source device respectively. If the input is a mobile phone, computer sound card, preamp and other audio sources, please turn the dial switches 1 and 3 to the ON end. If the input end is a mobile phone, computer sound card, preamp and other audio sources, please turn the dial switches 1 and 3 to the ON end, if the input ProductSiteLaunchDate : 2024-05-28T18:56:08.382Z Size : One Size SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1