Cart 2 india

Specification
Brand : Haofy
BulletPoint1 : [Wide Application] Ideal for industrial noise measurement in machinery, vehicles, ships, and more. also suitable for environmental noise monitoring and occupational health guard.
BulletPoint10 : Test cable length: 145MM
BulletPoint2 : [Construction] Made of excellent aluminum alloy, the noise meter detector is built to last and features an ip55 proof rating for against dust and water.
BulletPoint3 : [Accurate Measurements] Equipped with state-of-the-art technology, this sound level meter ensures data for monitoring and assessing noise levels.
BulletPoint4 : [User-friendly Interface] With a modular design, the outdoor noise sensor is easy to install and operate, providing a convenient solution for noise measurement in various settings.
BulletPoint5 : [Digital and Modular Design] The decibel noise sensor utilizes digital processing chips and digital detection technology, providing high reliability and wide dynamic range.
BulletPoint6 : Power supply: DC 4.5-5V
BulletPoint7 : Power consumption: <1W
BulletPoint8 : Number of pins: single row of 5 pins
BulletPoint9 : Pin spacing: 2.54MM
Color : TTL
ExternallyAssignedProductIdentifier : 7689750043029
IncludedComponents : Noise Detection Module
ItemName : Decibel Noise Sensor, Aluminium Alloy High Accuracy Environment Sound Level Meter for Vehicles DC9-30V, with Advanced Digital Technology, Easy to Install (YGC-ZS-KV-A2)
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 33 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sound-and-noise-meters
Manufacturer : Haofy
Material : See Description
MeasurementAccuracy : OTHER
ModelNumber : Haofy34wgh5artd-11
NumberOfItems : 1
PartNumber : Haofy34wgh5artd-11
ProductDescription :
Spec:

Item Type: Noise Transducer
Length: Approx. 292mm / 11.5in
Power Supply: DC 9-30V
Measurement Range: 30-130dB(A)
Sensitivity: -38±3dB (or 12.6mv/Pa)
Resolution: 0.1dB
Accuracy: ±3dB, calibrated at 23±5℃ ambient temperature, frequency weighted in accordance with IEC 61672 type 2 standard, calibration performed under the condition of input at 94dB (1kHz)
Frequency Range: 20Hz-12.5kHz
Response Time: 200ms, time response simulates the human ear's time response
Calibrator: for Bruel and Kjaer company, multifunction sound calibrator, model 4231
Microphone: Electret microphone
Directivity: Omnidirectional
Microphone Size: 0.5 Inch
Load Capacity: Impedance ≤350Ω for current output when powered by DC12V, ≤900Ω for current output when powered by DC24V, impedance ≥1KΩ for voltage output.
Maximum Power Consumption: 500mW
Material: Aluminum Alloy
Operating Environment: Temperature: -40℃-80℃, Humidity: ≤100 percent RH Non Condensing
Proof Grade: IP55
Troubleshooting :
The meter displays an incorrect value when outputting. It may be due to the wiring problem or communicating serial port failure that the correct data cannot be obtained. Please check whether the wiring is correct and firm, whether the serial port is occupied, and whether the serial port setting is correct.
Line Sequences:
Wire Color: Output Signal, Current
Red: Positive Power Supply
Black: Negative Power Supply
Yellow: Signal
Weight: Approx. 418.00g / 14.74oz



Package List:
1 x Noise Transducer
1 x Cable
1 x Manual




ProductSiteLaunchDate : 2025-02-18T00:00:00.000Z
Size : YGC-ZS-KV-A2
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 46171600