Cart 2 india

Specification
BatteriesRequired : 1
Brand : Hilitand
BulletPoint : TASI TA8151 Digital Sound Level Meter Noise Tester Sound Detector Decible Monitor 30-130dB Audio Measuring Instrument Alarm
BulletPoint1 : Easy To Use: This noise analyser is very simple to use to compare unfiltered and filtered systems, you just plug the tester into an unfiltered system, set the sensitivity to 100 and then plug the tester into a filtered system to see the difference in noise.
BulletPoint2 : Multifunctional: This power line noise analyzer is multifunctional, measuring interference and thus noise on the power supply network and comparing filtered and unfiltered systems.
BulletPoint3 : LCD Display: This power supply noise analyser is very easy to use with an LCD display that clearly shows the detected noise to help you keep track of the situation.
BulletPoint4 : Small Speakers: This AC power noise tester has small speakers to amplify the noise output directly and determine the source by sound to determine the size and frequency of the noise. The higher the noise level, the higher the sound level.
BulletPoint5 : LED Indicator: This power supply noise tester has an LED indicator which operates over a frequency range of 300kHz to 700kHz, below or these values the LED will light up to indicate that the value is out of range.
Color : White
ExternallyAssignedProductIdentifier1 : 0707457448644
ExternallyAssignedProductIdentifier2 : 707457448644
Hazmat1 : UN3218
IncludedComponents : Meter, Manual, Carry Case
ItemName : Power Line Noise Analyzer LCD Display Broadband 300KHz to 700KHz AC Power Tester Multifunctional LED Indicator and LCD Display (US Plug 110‑120VAC)
ItemPackageDimensions_Height : 11 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sound-and-noise-meters
Manufacturer : Hilitand
Material : Plastic
MeasurementAccuracy : +/- 1.5dB (ref 94dB @1KHz)
ModelName : Ywbl-whgv8d37zm4e
ModelNumber : Hilitandmd1w078st3-11
NumberOfItems : 1
PartNumber : Hilitandmd1w078st3-11
PowerSourceType : Battery Powered
ProductDescription :

Specification:
Item Type: Power Noise Analyzer
Material: ABS
Power Frequency: 50/60Hz
Operating Environment: Room Temperature 13-33℃, Altitude Below 2000m
Measurement Frequency: 300KHz-700KHz
Noise Indication: 3.5 Digit Black And White LCD Digital Display
Main Use: This AC power noise analyzer is mainly used to measure the frequency noise ratio on mains power 220v (or 110v). And through the small speaker inside the instrument, amplify and play the detected noise.

How to Use:
Plug in the power supply, insert the tester into the unfiltered system, set the sensitivity to 100, then insert the tester into the filtered system to view noise differences.

packing list:
1 x Noise Analyzer
1 x 1m Power Cord


ProductSiteLaunchDate : 2024-01-31T00:00:00.000-08:00
Size : US Plug 110‑120VAC
SpecificationMet : CE
Style : Us Plug 110‑120vac
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41113737