Cart 2 india

Specification
Brand : PATIKIL
BulletPoint1 : Color: White; Support Height: 4.8 mm / 0.19 inch; Base Size: 12.5 x 12.5 x 3 mm / 0.5 x 0.5 x 0.12 inch (L*W*H); Standoff Height: 14 mm / 0.55 inch; Hole Diameter: 3.2 mm / 0.1 inch; Packing List: 10 x Adhesive Standoff
BulletPoint2 : Advantage: The adhesive standoff base is composed of a foam base layer and a strong double-sided sponge adhesive, which can firmly position the PC board. The adhesive-backed bracket is a buckle design, which can be installed without screws, does not hurt the PC board, and can be reused.
BulletPoint3 : Instruction: The adhesive insulating bracket is snap-installed and used as an insulating spacer to fix the PC nail plate.
BulletPoint4 : Application: Adhesive insulating support isolation column, widely used in industrial and digital technology fields, can be used to isolate and fix pcb boards, PC board positioning, and heavy industrial production plate isolation, etc.
BulletPoint5 : NOTE: The maximum thickness of the adhesive standoff applicable PCB board is 1.9 mm.
GpsrSafetyAttestation : 1
ItemName : PATIKIL Adhesive Standoff, 10 Pack Reverse Mount Insulation Bracket Isolation Column PCB Spacer 0.19" Supporting Height, White
ItemPackageDimensions_Height : 9.2 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 6.1 centimeters
ItemPackageQuantity : 10
ItemShape : Straight
ItemTypeKeyword : hardware-spacers
Manufacturer : PATIKIL
Material : Nylon
ModelNumber : mif220507me0923
PartNumber : pta220705tt0625
ProductDescription : Adhesive insulating support isolation column, widely used in industrial and digital technology fields, can be used to isolate and fix pcb boards, PC board positioning, and heavy industrial production plate isolation, etc.

Specification
Color: White
Material: Plastic
Support Height: 4.8 mm / 0.19 inch
Base Size: 12.5 x 12.5 x 3 mm / 0.5 x 0.5 x 0.12 inch (L*W*H)
Standoff Height: 14 mm / 0.55 inch
Hole Diameter: 3.2 mm / 0.1 inch
Packing List: 10 x Adhesive Standoff

Advantage
The adhesive standoff base is composed of a foam base layer and a strong double-sided sponge adhesive, which can firmly position the PC board.
The adhesive-backed bracket is a buckle design, which can be installed without screws, does not hurt the PC board, and can be reused.

Instruction
The adhesive insulating bracket is snap-installed and used as an insulating spacer to fix the PC nail plate.

NOTE: The maximum thickness of the adhesive standoff applicable PCB board is 1.9 mm.


ProductSiteLaunchDate : 2022-08-28T14:46:38.172Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 31162500