Cart 2 india

Specification
Brand : Respicefinem
BulletPoint1 : Used in frequently disassembled parts, which greatly improve the service life of the thread.
BulletPoint2 : The steel wire sleeve is selected from low strength materials such aluminum and, which avoid slipping and misalignment and obtain excellent connection performance.
BulletPoint3 : The hardness of the wire screw sleeve is higher than that of the screw, so it has less wear during the connection and disassembly with the screw, and be used repeatedly.
BulletPoint4 : Set the thread insert into the screw hole of workpiece made of aluminum alloy and other materials to form female thread of high strength,wear resistant and high accuracy.
BulletPoint5 : Used in high voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc. Repair of threaded holes of parts, such as the repair of threaded holes of injection molding machine templates; Repair of T-threaded holes.
Color : 1 set
CompatibleWithVehicleType : Car
ExternallyAssignedProductIdentifier : 7897823574220
FinishType : Finish
IncludedComponents : inc
ItemName : 20pcs M9x1.5Thread Repair Tool Kit Stainless Steel Internal Thread Repair Thread Tap Kit
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-spark-plug-thread-repair-kits
Manufacturer : Respicefinem
Material : Material
MetalType1 : Stainless Steel
MetalType2 : Aluminum
ModelName : RAEGAN967
ModelNumber : RAEGAN967
NumberOfItems : 1
PartNumber : Respicefinem6rm0uqetwk
PowerSourceType : PowerSource
ProductDescription : Specification:Item Type:Thread Repair Insert Kit
Material:Stainless Steel
Thread Insert Size:M9X1.5 Length:2D 
Package List:1 x Spiral Drill1 x Screw Tap1 x Wrench1 x Break Pin Tool1 x Hex Wrench15 x Thread Repair Insert

Note:InstructionsDrill holes using a matching drill bit.Use wire threaded (special) tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.Use a break pin tool to align the mounting handle (tail) with a hammer to strike the punching tool and the tail handle can be removed.When there is a problem with the installation of the threaded screw sleeve, (such as a jumper), the threaded sleeve can be taken out by the wire threading tool.
ProductSiteLaunchDate : 2023-12-25T02:16:33.997Z
Size : One Size
UnitCount : 1
UnspscCode : 31161500