Cart 2 india

Specification
AudioOutputMode : Mono
Brand : USE
BulletPoint1 : Loudspeaker 16mm x 25mm rectangular 4 Ohms in sound chamber
BulletPoint2 : A very important part of the LokSound system is the speaker.
BulletPoint3 : Another crucial accessory is the sound chamber.
BulletPoint4 : specially developed loudspeakers geared to the sound decoder
ConnectivityTechnology : wired
ControllerType : Button
ExternallyAssignedProductIdentifier : 4044645503300
ExternallyAssignedProductIdentifier1 : 739894568456
ExternallyAssignedProductIdentifier2 : 0739894568456
FrequencyResponse : 100 hertz
IncludedComponents : no
IsWaterproof : FALSE
ItemName : Haut-parleur miniature rectangulaire 16 x 25 mm LokSound V4.0
ItemPackageDimensions_Height : 0.4 centimeters
ItemPackageDimensions_Length : 11.2 centimeters
ItemPackageDimensions_Width : 7.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : instrument-amplifier-speakers
Manufacturer : ESU
ModelName : Celestion G10N 40
ModelNumber : ESU 50330
MountingType : Flush Mount
PartNumber : ESU 50330
PowerSourceType : Corded Electric
ProductDescription : Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco. Another crucial accessory is the sound chamber. This helps create the necessary sound pressure for the speaker´s membrane and comes with most loudspeakers. If you are not sure about which loudspeaker fits into your loco we generally recommend to open the loco and measure the dimensions with a ruler. Since model railway manufacturers often tend to change (tacitly) the inner modifications of their locos we are not able to make recommendations in general. Therefore rely on your own observations! ! You must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well. When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0, LokSound micro V4.0 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms. With the present 100 Ohms loudspeakers you would hardly hear anything.
ProductSiteLaunchDate : 2014-02-10T17:20:24.194Z
SpeakerSize : 16 millimeters
SpeakersMaximumOutputPower : 4 watts
SpeakerType : Soundbar
SupplierDeclaredDgHzRegulation : not_applicable
SurroundSoundChannelConfiguration : 4.0
UnitCount : 2
UnspscCode : 52161500
Wattage : 40 watts