Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Mahugde
BulletPoint1 : Ergonomically Designed: Compared with the traditional one, this cylinder liner puller is ergonomically designed with a press rod, which is more labor-saving and facilitates your use during operation.
BulletPoint2 : High Compatability: This cylinder liner puller is suitable for any model with the inner diameter of the cylinder liner between 80-135mm. Meanwhile, both dry and wet types can be used.
BulletPoint3 : Easy Operation: This cylinder liner puller is easy to operate without much effort, saving your time and energy.
BulletPoint4 : Wide Application: This cylinder liner puller is used for the disassembly of the internal combustion engine and cylinder liner. It is suitable for any model with the inner diameter of the cylinder liner between 80-135mm.
BulletPoint5 : Easy to Install: You can easily install it without much effort and time because of its simple structure.
ExternallyAssignedProductIdentifier1 : 0736963647203
ExternallyAssignedProductIdentifier2 : 736963647203
IncludedComponents : Cylinder Puller
ItemName : Mahugde 15T Cylinder Puller, Hydraulic Cylinder Liner Puller Universal Puller Remover Tool Dry Wet Puller Fits for 80-140mm Engine
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 23 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-special-application-pullers
Manufacturer : Mahugde
Material : Steel
ModelName : Dry Wet Puller Fits
ModelNumber : Cylinder Puller
NumberOfItems : 1
PartNumber : 15T Cylinder Puller
ProductDescription :

Description

This cylinder liner puller is made of #45 steel which has good corrosion and wear resistance, so it is more durable and can be used for a long time.  Compared with the traditional one, this cylinder liner puller is ergonomically designed with a press rod, which is more labor-saving and facilitates your use during operation.

Application

It is used for the disassembly of the internal combustion engine and cylinder liner. It is suitable for any model with the inner diameter of the cylinder liner between 80-135mm.

How to Use

1. According to the model you need to disassemble, choose the pull plate and connecting rod (the connecting rod is divided into two lengths). 

2. Connect the connecting rod with the cylinder lifter, the steering knuckle and the pull plate.

3. Twist the steering knuckle of the cylinder puller to a right angle with the connecting rod. The straight side of the pull plate is parallel to the connecting rod and passes through the cylinder liner so that the small diameter of the pull plate is locked into the inner diameter of the cylinder liner. 

4. Sleeve the two support tubes onto the diagonal cylinder head screws. 

5. Pass the beam of the cylinder puller into the slideway of the lifting gear, and put both ends of the beam into the groove of the support tube. 

6. Screw the hydraulic assembly into the lifting gear (pay attention to the center hole on the beam) and tighten it. 

7. Check whether the pull plate, beam and support tube are accurately positioned. 

8. Transport the small plug of the hydraulic assembly with a pressure rod, and the cylinder sleeve can be pulled out smoothly. 

Specification

Max. Pulling Force: 15T

Material: #45 Steel

Maximum Stroke (Piston Push Rod): 5cm/1.97in

Weight: 18kg/39.68lbs

Package Included

1* Cylinder Puller

Other Accessories for Use

ProductSiteLaunchDate : 2025-04-11T05:23:01.556Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : 1