Cart 2 india

Specification
Brand : Arconic
BulletPoint1 : "ST" designates a trace element calibration standard in a specific alloy family
BulletPoint2 : Certified reference material for aluminum alloy with size 2.5” Ø (64mm) x 1" (25mm) circular disk
BulletPoint3 : NIST traceable certified concentrations for up to 31 elements ranging from ppm to percent levels
BulletPoint4 : Extensive statistical analysis used to ensure homogeneity/ accuracy of final concentration values
BulletPoint5 : All products are stenciled to show catalog number, product lot and section number
Color : Green
Department : unisex-adult
ExternallyAssignedProductIdentifier : 8108057565076
ItemDisplayWeight : 0.5 pounds
ItemForm : Powder
ItemName : Aluminum Certified Reference Material for Trace Metal Analysis of Alloy 8079, ST3-8079
ItemPackageDimensions_Height : 7 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : specialty-non-ferrous-metals-raw-materials
Manufacturer : Arconic Inc.
Material : Titanium
ModelNumber : C846B48EA
NumberOfItems : 1
PartNumber : ST38079
PercentageAssay : 99.995
ProductDescription : Arconic Spectrochemical Reference Materials, located at the Arconic Technology Center near Pittsburgh, Pennsylvania has been producing certified reference materials (CRMs) and reference materials (RMs) for the aluminum industry for more than 70 years. Our CRMs are widely recognized for their uniformity and accuracy of certification. Arconic CRMs and RMs are typically used for calibration, drift correction, quality assurance, and method validation for Spark-AES instrumentation used by the aluminum industry to verify the composition of aluminum and aluminum alloys. We maintain a large inventory of CRMs and RMs consisting of more than 300 alloy compositions targeted to meet the needs of the aluminum industry. Arconic Spectrochemical Reference Materials holds accreditations for the following ISO standards: Guide 34:2009, 17025:2005, and 9001:2008. Arconic Trace Metal CRMs supplement our regular alloy CRMs. A unique method for trace metal additions allows alloys to be produced with highly controlled trace metal concentrations. Trace metal concentrations have been picked to provide both low end calibration points (<0.0001%) and points that are typical for trace metal content that can be measured with good precision and accuracy by today’s instrumentation. Actual concentrations may vary from those shown in the our catalog, but will always be certified using a combination of analytical techniques including Spark-AES, ICP-AES, GD-MS, ICP-MS and other appropriate techniques. CRMs designated by the prefix “ST” contain trace elements in a matrix similar to the specific alloy family indicated within the “ST” designation, e.g. ST1-1050.
ProductSiteLaunchDate : 2017-01-13T21:39:56.329Z
Size : Small
UnitCount : 1
UnspscCode : 41000000