Cart 2 india

Specification
Brand : Generic
BulletPoint1 : High Speed Steel
BulletPoint2 : 3 Flute
ItemName : M4 X 0.7 D4 3 Flute High Speed Steel Spiral Flute Bottom Tap
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-flute-threading-taps
Manufacturer : Morse Cutting Tools
Material : High Speed Steel
ModelNumber : 30942
PartNumber : 30942
ProductDescription : M4 X 0.7 D4 3 Flute High Speed Steel Spiral Flute Bottom Tap
3 Flutes
.236" Thread Length
.514" Neck Length
2-1/8" Overall Length
30942
ONYX Tap
Spiral Flute
48° Helix Angle – CNC Reduced Neck Design
Bright Finish – High Speed Steel

Spiral Flute Taps are designed to lift chips out of the hole in tapping blind holes, removing chips that can damage threads and break taps. They can also bridge cross-holes, keyways and other interruptions in the holes.
Recommended for a wide range of materials up to 28Rc
(2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth.
CNC Reduced Neck Design enhances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling. Also reduces contact between the tap and the work piece.
ProductSiteLaunchDate : 2025-02-23T16:58:49.729Z
UnspscCode : 27111700