Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Spiral Flute Tap: Thread size: 3/8-24 UNF; thread length: 32mm / 1.26", overall length: 75mm / 2.95", square shank side width: 5.5mm / 0.22". 2B tolerance, right-hand thread cutting, with clean threads and sharp-cut cutting edges for fast and accurate tapping.
BulletPoint2 : Notable Features: Spiral flute design prevents breakage, and enables more efficient tapping. The spiral tip of the tap helps guide it into the hole, reducing the torque required to turn it, and the flutes easily remove extra from the hole and machine.
BulletPoint3 : Wide Applications: Spiral flute thread taps are suitable for machining blind or deep holes and sticky materials, and can be used for tapping stainless steel, aluminum, cast iron, alloy steel, ordinary steel, non-ferrous metals, hard plastics, etc. Suitable for drilling machines, tapping machines, CNC machine tools and milling machines. Used with tapping oil, you can get more precise threads and more durable taps.
BulletPoint4 : Strong & Durable: The taps are made of M2 high-speed steel (HSS6542) and run at high speeds to quickly and efficiently process threads. It has high hardness, toughness and good wear resistance, good cutting performance, and can produce clean and precise holes. Nitrided surface can improve corrosion resistance and hardness, reduce friction, and extend service life, making it very suitable for a wide range of applications.
BulletPoint5 : Warm Tip: It is recommended to use machine taps with tap chucks with overload protection. It is not recommended for manual use and electric drill tapping to avoid damage caused by uneven force. The tapping angle should be 90 degrees vertical. The harder the material, the slower the drilling speed.
Color : Black
ExternallyAssignedProductIdentifier1 : 0655222898104
ExternallyAssignedProductIdentifier2 : 655222898104
FinishType : Nitrided Coated
HandOrientation : Right Hand
IncludedComponents : 1 x 1/4" OSG HYPRO Endmill
ItemName : uxcell Spiral Flute Thread Taps 3/8-24 UNF 2B Machine Threading Tap Bit, Nitrided Coated Screw Tapping Repair Tool, M2 High-Speed Steel (HSS)
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 3.54 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-flute-threading-taps
Manufacturer : uxcell
Material : HSS6542
ModelName : 3/8-24 UNF
ModelNumber : E0162
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : a25010200ux2146
PowerSourceType : hand_powered
ProductDescription : Specifications:
Thread Size: 3/8-24 UNF
Tolerance: 2B
Thread Length: 32mm / 1.26"
Square End Size: 5.5mm / 0.22"
Round Shank Dia.: 8mm / 0.31"
Total Length: 75mm / 2.95"
Blade Length: 25mm / 0.98"
Material: M2 High-Speed Steel (HSS6542)
Finish: Nitrided Coated
Cutting Direction: Right Hand
Package Included: 1 x Spiral Flute Thread Taps


Descriptions:The spiral flute design prevents breakage, and enables more efficient tapping. The spiral tip of the tap helps guide it into the hole, reducing the torque required to turn it, and the flutes easily remove extra from the hole and machine.
Spiral flute thread taps are suitable for machining blind or deep holes and sticky materials, and can be used for tapping stainless steel, aluminum, cast iron, alloy steel, ordinary steel, non-ferrous metals, hard plastics, etc. Suitable for drilling machines, tapping machines, CNC machine tools and milling machines. Used with tapping oil, you can get more precise threads and more durable taps.
The taps are made of M2 high-speed steel (HSS6542) and run at high speeds to quickly and efficiently process threads. It has high hardness, toughness and good wear resistance, good cutting performance, and can produce clean and precise holes. Nitrided surface can improve corrosion resistance and hardness, reduce friction, and extend service life, making it very suitable for a wide range of applications.
It is recommended to use machine taps with tap chucks with overload protection. It is not recommended for manual use and electric drill tapping to avoid damage caused by uneven force. The tapping angle should be 90 degrees vertical. The harder the material, the slower the drilling speed.

ProductSiteLaunchDate : 2025-02-19T07:05:36.771Z
Size : 3/8-24 UNF
SpecificUsesForProduct : Tapping
Style : Bottoming
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500