Cart 2 india

Specification
Brand : YG
BulletPoint1 : High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
BulletPoint2 : Titanium carbonitride coatings are harder and more wear-resistant than TiN for improved tool life and faster cutting speeds
BulletPoint3 : Round shanks allow use with a wide variety of toolholding systems
BulletPoint4 : When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
BulletPoint5 : 0.433-inches thread length
FinishType : Uncoated
IncludedComponents : htlcsmroa210706hh0354
IsValueStoresItem : 1
ItemName : YG-1 T5 Series High Vanadium HSS Spiral Flute Combo Tap, TiCN Coated, Round Shank with Square End, Modified Bottoming Chamfer, M6-1.0 Thread Size, D5 Tolerance
ItemPackageDimensions_Height : 10.4 centimeters
ItemPackageDimensions_Length : 0.7 centimeters
ItemPackageDimensions_Width : 10.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-flute-threading-taps
Manufacturer : YG-1 Tool Company
Material : high-speed steel
ModelName : 3/8-16 BSW
ModelNumber : T5315C
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : T5315C
PowerSourceType : hand_powered
ProductDescription : Specifications:
Thread Size: 3/8-16 BSW
Tolerance: H2
Thread Length: 23mm / 0.91"
Square End Size: 5.4mm / 0.21"
Total Length: 75mm / 2.95"
Material: M2 High-Speed Steel (HSS6542)
Finish: Uncoated
Cutting Direction: Right Hand
Package Included: 2 x Spiral Flute Thread Taps


Descriptions:The spiral flute design ensures smooth chip evacuation, prevents breakage, and enables more efficient tapping. The spiral tip of the tap helps guide it into the hole, reducing the torque required to turn it, and the flutes easily remove chips and debris from the hole and machine.
Spiral flute thread taps are suitable for machining blind or deep holes and sticky materials, and can be used for tapping stainless steel, aluminum, cast iron, alloy steel, ordinary steel, non-ferrous metals, hard plastics, etc. Suitable for drilling machines, tapping machines, CNC machine tools and milling machines. Used with tapping oil, you can get more precise threads and more durable taps.
Taps are made of M2 high-speed steel, It has high hardness, toughness and good wear resistance, good cutting performance, and can produce clean and precise holes. Uncoated tap is easy to maintain and repair, and great for a wide range of applications.
It is recommended to use machine taps with tap chucks with overload protection. It is not recommended for manual use and electric drill tapping to avoid damage caused by uneven force. The tapping angle should be 90 degrees vertical. The harder the material, the slower the drilling speed.

ProductSiteLaunchDate : 2013-09-23T00:00:01-07:00
Size : M6
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 27111700