Cart 2 india

Specification
Brand : CLEVELAND
BulletPoint : CLEVELAND Spiral Point Tap,M2.5x0.45,HSS C57044
BulletPoint1 : 【Size】Length: 8.3"/210mm, Thread Head: 5.3"/135mm.
BulletPoint2 : 【Feature】Made of High-speed steel with high hardness and toughness, Titanium coating for improving wear and fusion resistance, long service life.
BulletPoint3 : 【Application】Make or repair thread, suitable for most metals, copper, alloy steel, stainless steel(below 30HRC), cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
BulletPoint4 : 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
BulletPoint5 : 【Package Included】1pc ACME 7/8"-4 Ti-Coated Trapezoidal Tap.
Color : No Hot Or Cold Inlet Pipes
ExternallyAssignedProductIdentifier1 : 697334570448
ExternallyAssignedProductIdentifier2 : 0697334570448
FinishType : Ti-Coated
IncludedComponents : Spiral Point Tap,M2.5x0.45,HSS
ItemName : CLEVELAND Spiral Point Tap,M2.5x0.45,HSS C57044
ItemPackageDimensions_Height : 3.2 inches
ItemPackageDimensions_Length : 0.4 inches
ItemPackageDimensions_Width : 0.02 inches
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-point-threading-taps
Manufacturer : CLEVELAND
Material : High Speed Steel
MeasurementSystem : English/Standard
ModelName : No Hot Or Cold Inlet Pipes
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : C57044
ProductDescription : Size: ACME 7/8"-4 Ti-Coated Trapezoidal Thread Taps.
Cutting Direction: Right Hand.
Material: High Speed Steel.

Easy to Use
It can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.

Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; cast iron: 8-10m/min.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
ProductSiteLaunchDate : 2020-07-29T01:15:40.217Z
Size : ACME 7/8"-4
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43201830