Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Shank diameter: 1/8"; cutting diameter: 1/8"; cutting length: 43/64"; total length: 1-1/2"; cutting hardness: HRC44-46; helix angle: 30 degree.
BulletPoint2 : Material - Made of high-hardness tungsten steel, spiral cutter is wear-resistant, corrosion-resistant and has good cutting performance. The polished surface of milling cutter is flat and smooth, reducing material adhesion during cutting.
BulletPoint3 : Feature - 2 flutes and spiral design of the end mill router bits facilitate the smooth discharge of chips and avoid blockage during cutting. Precision cutting edges ensure clean and accurate cutting.
BulletPoint4 : Application - The up cut spiral router bit is suitable for side milling, finishing, grooving, stamping, engraving and other processing of cork, hardwood, plywood, laminate, oak, MDF, etc. Can be used with cnc routers and handheld routers, etc.
BulletPoint5 : Notice - Be careful to avoid excessive and too fast feeding. It is recommended to use suitable coolant or lubricant during use to dissipate heat and extend tool life.
CutType : Flush-Trim Cut
EndCutType : Center
ExternallyAssignedProductIdentifier1 : 0810137202570
ExternallyAssignedProductIdentifier2 : 810137202570
FinishType : Diamond-Like Carbon Coated
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemName : HARFINGTON 5pcs Spiral Router Bit 1/8" Cut Dia 2 Flute Up Cut End Mill Bits Milling Cutter for Wood Carving Engraving (1/8" Shank 43/64" Cut Length 1-1/2" Long 30 Degree Helix HRC44-46)
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 5
ItemTypeKeyword : spiral-router-bits
Manufacturer : HARFINGTON
Material : Tungsten Steel
ModelNumber : WALFRONTr83xbezpq1
NumberOfCuttingEdges : 1
NumberOfFlutes : 1
NumberOfItems : 5
PackageLevel : unit
PartNumber : htf240629hh000936
Pattern : double-edged spiral
ProductDescription : Made of high-hardness tungsten steel, spiral cutter is wear-resistant, corrosion-resistant and has good cutting performance. The polished surface of milling cutter is flat and smooth, reducing material adhesion during cutting.
2 flutes and spiral design of the end mill router bits facilitate the smooth discharge of chips and avoid blockage during cutting. Precision cutting edges ensure clean and accurate cutting.
The up cut spiral router bit is suitable for side milling, finishing, grooving, stamping, engraving and other processing of cork, hardwood, plywood, laminate, oak, MDF, etc. Can be used with cnc routers and handheld routers, etc.
Note: Be careful to avoid excessive and too fast feeding. It is recommended to use suitable coolant or lubricant during use to dissipate heat and extend tool life.

ProductSiteLaunchDate : 2024-10-09T08:45:40.090Z
Size : 1/8"x1/8"x43/64"x1-1/2"
Style : 1/4 SH
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 5
UnspscCode : 23241600