Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Shank diameter: 1/4"; cutting diameter: 1/16"; cutting length: 1/2"; total length: 2"; cutting hardness: HRC49-51; helix angle: 30 degree.
BulletPoint2 : Material - Made of high-hardness tungsten steel, spiral cutter is wear-resistant, corrosion-resistant and has good cutting performance. The polished surface of milling cutter is flat and smooth, reducing material adhesion during cutting.
BulletPoint3 : Feature - 2 flutes and spiral design of the end mill router bits facilitate the smooth discharge of chips and avoid blockage during cutting. Precision cutting edges ensure clean and accurate cutting.
BulletPoint4 : Application - The up cut spiral router bit is suitable for side milling, finishing, grooving, stamping, engraving and other processing of cork, hardwood, plywood, laminate, oak, MDF, etc. Can be used with cnc routers and handheld routers, etc.
BulletPoint5 : Notice - Be careful to avoid excessive and too fast feeding. It is recommended to use suitable coolant or lubricant during use to dissipate heat and extend tool life.
Color : One Color
CutType : Upcut
EndCutType : Flat End
ExternallyAssignedProductIdentifier : 3614674756537
ExternallyAssignedProductIdentifier1 : 738685144251
ExternallyAssignedProductIdentifier2 : 0738685144251
ExternallyAssignedProductIdentifier3 : 00738685144251
FinishType : Unfinished
GpsrSafetyAttestation : 1
IncludedComponents : 1 Amana Branded Tool
ItemName : HARFINGTON Spiral Router Bit 1/16" Cut Dia 2 Flutes Up Cut End Mill Bits Milling Cutter for Wood Carving Engraving (1/4" Shank 1/2" Cut Length 2" Long 30 Degree Helix HRC49-51)
ItemPackageDimensions_Height : 0.47 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : spiral-router-bits
Manufacturer : HARFINGTON
Material : Tungsten Steel
ModelNumber : 51442-K
NumberOfCuttingEdges : 2
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : htf240629hh000915
ProductDescription : Made of high-hardness tungsten steel, spiral cutter is wear-resistant, corrosion-resistant and has good cutting performance. The polished surface of milling cutter is flat and smooth, reducing material adhesion during cutting.
2 flutes and spiral design of the end mill router bits facilitate the smooth discharge of chips and avoid blockage during cutting. Precision cutting edges ensure clean and accurate cutting.
The up cut spiral router bit is suitable for side milling, finishing, grooving, stamping, engraving and other processing of cork, hardwood, plywood, laminate, oak, MDF, etc. Can be used with cnc routers and handheld routers, etc.
Note: Be careful to avoid excessive and too fast feeding. It is recommended to use suitable coolant or lubricant during use to dissipate heat and extend tool life.

ProductSiteLaunchDate : 2024-09-30T16:03:12.869Z
Size : 1/16"x1/4"x1/2"x2"
SkipOffer : 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112803