Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint : Made in the USA
BulletPoint1 : Size - Shank diameter: 1/4"; cutting diameter: 3/16"; cutting length: 3/4"; total length: 2"; cutting hardness: HRC44-46; helix angle: 30 degree.
BulletPoint2 : Material - Made of high-hardness tungsten steel, spiral cutter is wear-resistant, corrosion-resistant and has good cutting performance. Nano blue coating with high hardness and heat resistance ensures that the cutting edge maintains its sharpness and lubricity.
BulletPoint3 : Feature - 3 flutes and spiral design of the end mill router bits facilitate the smooth discharge of chips and avoid blockage during cutting. Precision cutting edges ensure clean and accurate cutting.
BulletPoint4 : Application - The up cut spiral router bit is suitable for side milling, finishing, grooving, stamping, engraving and other processing of cork, hardwood, plywood, laminate, oak, MDF, etc. Can be used with cnc routers and handheld routers, etc.
BulletPoint5 : Notice - Be careful to avoid excessive and too fast feeding. It is recommended to use suitable coolant or lubricant during use to dissipate heat and extend tool life.
Color : Silver and Blue
CutType : Up-Cut
EndCutType : Flat End
ExternallyAssignedProductIdentifier1 : 738685517826
ExternallyAssignedProductIdentifier2 : 0738685517826
FinishType : Unfinished
GpsrSafetyAttestation : 1
IncludedComponents : Router Bit
ItemName : HARFINGTON Spiral Router Bit 3/16" Cut Dia 1 Flute Up Cut Nano Blue Coated End Mill Bits Milling Cutter for Wood (1/4" Shank 3/4" Cut Length 2" Long 30 Degree Helix HRC44-46)
ItemPackageDimensions_Height : 11.6 centimeters
ItemPackageDimensions_Length : 1.3 centimeters
ItemPackageDimensions_Width : 3.7 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : spiral-router-bits
Manufacturer : HARFINGTON
Material : Tungsten Steel
Material1 : Carbide
Material2 : Alloy Steel
MeasurementSystem : Metric
ModelNumber : 51782
NumberOfCuttingEdges : 12
NumberOfFlutes : 3
NumberOfItems : 1
PartNumber : htf240629hh000484
ProductDescription : Made of high-hardness tungsten steel, spiral cutter is wear-resistant, corrosion-resistant and has good cutting performance. Nano blue coating with high hardness and heat resistance ensures that the cutting edge maintains its sharpness and lubricity.
3 flutes and spiral design of the end mill router bits facilitate the smooth discharge of chips and avoid blockage during cutting. Precision cutting edges ensure clean and accurate cutting.
The up cut spiral router bit is suitable for side milling, finishing, grooving, stamping, engraving and other processing of cork, hardwood, plywood, laminate, oak, MDF, etc. Can be used with cnc routers and handheld routers, etc.
Note: Be careful to avoid excessive and too fast feeding. It is recommended to use suitable coolant or lubricant during use to dissipate heat and extend tool life.

ProductSiteLaunchDate : 2024-10-09T08:45:32.215Z
Size : 3/16"x1/4"x3/4"x2"
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Acrylonitrile Butadiene Styrene
SurfaceRecommendation4 : Fiberglass
SurfaceRecommendation5 : Composite
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112800