Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : End Mill Router Bit: Shank diameter: 3.175mm / 1/8"; cutting diameter: 3.175mm / 1/8"; cutting edge length: 22mm / 0.87"; overall length: 45mm / 1.77". Used on engraving machine, CNC machines, and machining center.
BulletPoint2 : Wide Applications: Suitable for engraving, cutting, carving, milling, slotting in MDF, ABS, PVC, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.
BulletPoint3 : Spiral and Sharp Flute: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Provide good cutting strength and milling effect to ensure high work efficiency.
BulletPoint4 : Carbide Tool: Carbide (tungsten steel) end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel.
BulletPoint5 : Tips: Adopts spray and air jet cooling to improve the use effect of the milling cutter. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to slow down the speed and reduce the feed speed or cutting amount.
Color : Silver Tone
CutType : Center Cutting
EndCutType : Center
ExternallyAssignedProductIdentifier : 9406092423337
IncludedComponents : Trimmer
ItemName : uxcell End Mill CNC Router Bit, 1/8" 3.175mm Shank 3.175mm x 22mm Left Hand Carbide Single Flute Spiral Upcut Milling Cutter for Carving Acrylic PVC MDF Hardwood, 2pcs
ItemPackageDimensions_Height : 13.9 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : spiral-router-bits
Manufacturer : uxcell
Material : Carbide (Tungsten Steel)
ModelNumber : I0699HO5XES103G905V7N5FUW
NumberOfFlutes : 1
NumberOfItems : 1
PartNumber : a21122300ux0832
ProductDescription : Specifications:
Shank Diameter: 3.175mm / 1/8"
Cutting Diameter: 3.175mm / 1/8"
Cutting Edge Length: 22mm / 0.87"
Overall Length: 45mm / 1.77"
Material: Carbide (Tungsten Steel)
Number of Flutes: Single Flute
Style: Left Hand
Hardness: 45-48HRC
Package Content: 2pcs x End Mill Router Bit

Descriptions:Suitable for engraving, cutting, carving, milling, slotting, sculpturing in MDF, ABS, PVC, PP, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.
Made of carbide (tungsten steel), the end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, ensures high work efficiency.
Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Upcut end mills can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life.
Used on engraving machine, CNC machines, and machining center. Adopts spray and air jet cooling to improve the use effect of the milling cutter. The end mill is easily twisted off when using on hand drill.
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2022-01-25T12:10:27.886Z
Size : 3.175mm x 22mm
Style : Left Hand
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1